Search results for query: *

PM me your e mail address and I will send you a paypal invoice

9.5” converter?

good info & actually I have one of the early large port magnum manifolds but it slightly touches the top of the steering box to where it will not seat flush to the head ex ports & I have already slotted the box mounting holes so I could lower the box (& a guy posted that this would affect bump...

looks like i struck a nerve there

Nothing wrong with a good ol teen. A few tweaks, and good common sense, and you get a nice, efficient little mill that will just cry out to have more beatings unleashed upon it. Go ahead, spin it 6500. If it finally does decide to let go, a good core can be bought for 200 or less. Treat it to a...

I could use it. Paypal?

Thank you John, Found what I need.

I never thought I would need this, but I was wrong.

With the trans filter back on and the pan back on and 4 quarts of new trans fluid back in the pan. Put a "T" with a 10" long rubber down hose on it and plumb that in on the passenger side trans cooler line before it enters the radiator. Put the 10" long rubber down tube into a 1 gallon old...

Terrible news Mike !

the coloring will be different pump gas to race gas. The VP blue I run is…..well…. blue. The dye and the lead effect what the plugs look like. C12 is green. The cut plug I posted is more than likely VP blue.

Sad news Mike. Glad you can be there though. Thoughts with you and the family

Great! Just didn't want you to have extra work on top of the drain plug worries. I wonder if you were to remove the converter to flex plate bolts, then push the converter back into the trans as far as it will go, could you get a wrench on that drain plug? That may not work because of the lip...

I'm gathering parts for my 383 swap into my '75 Duster and have a question regarding exhaust. I have an opportunity to buy some '70 B-Body HP exhaust manifolds and am wondering how much performance loss and I can expect over a set of headers. TTI headers are not in my budget and I don't like the...

In my thoughts Mike!

Be extra careful with road or parking lot obstructions. They crack, not dent.

That's sad news Mike.

Welcome back Jimbo.

I personally have never bought anything from Speedmaster refuse to let my friends buy anything from Speedmaster and think it's junk... China will steal anything .... If You Let Em...Really would hate to pop one of my hoods and see that generic name

Nothing to report here on the hill, about to loose my cousin and Mopar brother just 40 miles away, we have been very tight the last 45 years, some may remember his mopars I have posted

You really need to read back :poke: :rofl: :rofl: :rofl: :rofl::rofl::rofl:

It's Thundersalt Thursday! Good morning :D

TBF I'm sure you did. I'm traveling for work and haven't had time to read all the posts. I'm not knocking OP, I just figured I'd go big or go home.

Ah yes, Uncle Tony ..he still around...? Id imagine he's repeated every Mopar video he's made oh 3 times or more now... Ill chime in a bit, what I remember as a kid in the 80s (teenager drivers license in 86...) was that in the Mopar world B bodies with 383s were the standard. Uncle Tony may...

Welcome! Advil! :steering:

Correction #6 misaligned.