Search results for query: *

  • Order by relevance
  1. Swinger 340

    Got a new Truck (new to me)

    Not sure why you are using a "manual shut-off" control devise for the heater. Also I always like my coil attached to the engine, for limiting vibrations movements. I know anti-freeze is for cold climates, to help keep the cooling system from freezing, but I believe it also helps in over heating...
  2. pittsburghracer

    The “Ugly Torquer” intake

    No not really. I’ve done fords and may be doing another one. Hopefully soon LS heads but I’ve done Chevy Dart heads and AFR 220 heads and even a Volkswagen head but I’m going to cut back some.
  3. fatoldguy

    Stop in for a cup of coffee

    Morning .
  4. MidnightSwinger

    zinc oil useage?

    Cheap and easy to find
  5. JDMopar

    Got a new Truck (new to me)

    If you do the front rotor swap, that will be the easy part if what I have read is correct. You could pull a rear wheel and drum, then look to see if there is enough flange on the axle to have drilled to 4.5 bolt pattern and also turn the center register down to what you need for drums that fit...
  6. Oldmanmopar

    1969 Dart 340 Auto Transmission Mount

    Post some pictures. You must have something else wrong. Same mount insulator for all. The difference in height is due to the weight of the trans sitting on the original mount for 50 years . I have some the are almost 1/2 inch shorter by eye, They are very old, wore out, and shot.
  7. ValiantS

    70 dart 470 ci drag car build.

    Right! Excellent idear.
  8. missing linc

    3-18-24

    Condolences on the loss of your brother Dan.
  9. MOPARMAGA

    70 dart 470 ci drag car build.

    Yes as soon as I know they're in where they belong.
  10. MOPARMAGA

    70 dart 470 ci drag car build.

    Dang I forgot, I didn't even think of using cleko's. It's been a couple decades since I've done sheet metal work & never to this extent.
  11. Heywodja

    727 Cooler Lines Help

    Just a heads up, stainless lies are hard to bend. Often those replacement lines will need some tweaking in order to get them to fit correctly.
  12. Swinger 340

    NGK plugs.

    I remember when "NGK" were for Japan cars, Bosch plugs were for Europe cars, Bosch plugs were for German cars and Champion were for Chrysler. Not sure of the Pulstar or Denso plugs.
  13. Spadman

    Torque plates and gen good machine shop

    Unfortunately, Bo Beverly passed away about a month ago. Another racing legend gone. When I called before; he was in the hospital and today I found he was gone. I missed the chance to make that visit. Some speculation his son may carry on the business but the phone is discontinued at present.
  14. Demonracer

    Torsion Bar won’t fit

    Is it possible to have the wrong strut bars or they might be swapped side to side?
  15. barbee6043

    [WANTED] ISO clean rustfree 70 Dart swinger roller

    Listen up Canute!!! :poke: Texas is as large as 4 big states. Part gets plenty of rain, parts gets some rain and parts get almost NO rain!!!!! You paint with a wide brush!!!!:thumbsup:
  16. 7

    Torsion Bar won’t fit

    There is a right side and a left side
  17. RockinRobin

    1972 Dodge Colt

    Do you plan on going to the track Friday or Sunday?
  18. C

    Some FABO members just won't listen!!!!!

    Al, we won’t forget that day either. You and Theresa are like family to us. We enjoyed that day also! Hope you two are doing well and that we can spend another day together. Tell T we said hello!
  19. RustyRatRod

    The “Ugly Torquer” intake

    No slant heads. No Cleveland stuff. Prejudice much? LMAO
  20. 71GSSDemon

    Stop in for a cup of coffee

    @Unconventional I got mine made by Larry at Sled City fiberglass. https://m.facebook.com/p/Sled-City-100054584553720/?locale=ms_MY
  21. pittsburghracer

    The “Ugly Torquer” intake

    No thank you. Lol
  22. CFD244

    Add Your Own Caption Part 357

    You've got to ask yourself one question.........Are 360's as good as 340's, well are they punk?
  23. ProjectBazza

    Air Conditioning Parts

    When I managed a NAPA store we used to get quite a bit of the local J.D. A/C business, as the local Rep/Dealer was "awfully fond" of their parts. Enough so that we could mark it up and still beat their pricing!
  24. 92b

    zinc oil useage?

    What do you mean by "oil is changed after each session"?
  25. Scott_ 69HemiDart

    Stop in for a cup of coffee

    I got my Hemi scoop from them........................quality and customer service are excellent.
  26. toolmanmike

    Air Conditioning Parts

    There you go. I was trying to think of 4 Seasons but couldn't come up with it. My coffee hasn't kicked in yet. :lol:
  27. Unconventional

    Stop in for a cup of coffee

    :rofl: :rofl:
  28. ProjectBazza

    Air Conditioning Parts

    Or go to an "old" NAPA store (one that still uses the book racks) and ask to look through their Four Seasons catalog. They can easily take it out of their rack and let you do the looking yourself while they help other people.
Back
Top