Search results for query: *

This is the one I have.

BMW. "Big Money Wasted"

I agree but those guys have to hit the nitrous early to run 4.70’s-5.0’s and sometimes stuff happens.

the third gear is the weakest gear, in a four speed trans, i knew a racer did his burnouts in 3 rd gear, kept breaking 3rd gear. we used a 1600 # b&b/long pressure plate in 340 car, had no problems breaking gears , with a series 300 disc. used in drag car. just food for thought

It’s never over till it’s over. Blocked out the epoxy primer that I put down yesterday found a few low spots and a few edges that I did not like. Little bit of glaze little more blocking with 80 grit and a quick sand with 180 grit and it’s flat. Sprayed on a couple light coats of gray epoxy...

Look into Amp Research power steps, I think they do a model that drops lower than the normal steps. I have the regular ones and they are nice.

A Mercedes Sprinter RV for me......No more German engineering for this cat when it's gone.

I've been busy with all kinds of other things so I haven't had a lot of time for this project. I'm also getting annoyed at how long this little project is taking to I have regressed into my normal habit of not documenting what I'm doing. Well, I replaced the bent pushrod. It was #3 exhaust...

A buddy of mine has a 28 A Tudor. It's not unusual for it to get a few hundred miles on it any weekend that the weather is decent.

has lite bezels for rear panels as well as switch wiring. in good shape. shipping included

Hello I am interested please in the driver side door jamb pillar I have your PayPal address, just please let me know how much for shipping to Edinburg Texas 78539 and will send you the payment. Thank you

The one I am aware of is the pn#1995

this harness is in really nice shape. has the reverse wires for 68 only. $12 shipping

I’d like to know which one he has. I have a Weiand TR here that’s mine. If they aren’t the same I’d test mine against what he has. I’m pretty sure they made a street/strip manifold and a more race oriented one. I have the latter. Edit: I just looked and didn’t see any thing other than what I...

Was that car hemi powered at the time of the crash? There aren't to many small blocks capable of yanking the frontend like that.

Thanks, Rusty for checking on this. The price seems reasonable compared to some of the products I have seen in the past. I was just getting ready to do something with my new Ram truck and travel trailer, so this is very helpful.

Here's what I was looking for in the TIPM: Vehicle Configuration Data: ____________________________________ Vehicle Config 1: Tip Start Present: Set Vehicle Config 1: Diesel Regeneration Present: Not Set Vehicle Config 1: Hybrid Electric Powertrain: Not Set Vehicle Config 1...

Do it, I'd love to see how that intake performs!

I've done some Beemer work in the past, it sucked, don't work on them anymore.

Don’t tempt me…if I had 2 carbs laying around here I’d do that in a New York second. Oh wait…I do…

You’re not on the hook for any repairs or maintenance and get a new car every three years.

Cleaned/greased my hurst competition shifter. Straightened out the 3/4 arm (didn’t sit flush in the stack)

Is this on both sides or just driver side? I just replaced my LCA bushes on my B Body and on the driver's side when the LCA is at full droop as I tightened the LCA nut (not torquing it, just tightening it loosely to seat the pin in the K frame), a small part of the LCA hit the K frame, and when...

Torque spec is 45 ft/lb.

^^^ those may work. I emailed them to see if the length of em will work for me. thank you. RR

Sounds good and think from me or Body person we should figure it out.

How to delete conversations from your inbox...

@toolmanmike this is the main ceramic product Terius uses. He says it ain't cheap but it works good. https://www.amazon.com/dp/B0BZPLW799?tag=fabo03-20

But your a body man. I will send pics, looks to me it just clips on, but how don’t want to kink it.

So how do I delete conversations