Search results for query: *

UTG video today hes changing LCA bushing ,and he said he found a poly bushing that you install but leave the metal shell in there and put in a polyurethane bushing, Anyone ever hear of this type before? or is he blowin smoke again

Would a 28x12.5x15 fit in the wheel well with a 3 inch spring relocation kit installed? Thanks (factory A body rear end)

Are all Moog bushings now made offshore? Just wondering about quality and control issues. Thanks for any input

Looking for the spring perch measurement center to center on 1981 truck,had no luck on the Truck forum search.so thought Id try here. Thanks FABO

Lookin for a little help here,I want to put a A-body 8 3/4 housing under my D-150 short -bed truck. My question is will my pinion angle be to much with axle mounted on top of springs. Can I shim spring perches if needed? Thanks for all your help.......sabre67

Thinking about Borgeson style u-joint on steering shaft at bottom of colunm.Would you weld it,pin it, or ? Thoughts......thanks

Hi all Looking at the Eaton tru-trac differential and if anyone has installed one in a 8 3/4 axle and if they had any opinions good or bad on the unit? Or should I just stay with a clutch type sure grip? Thanks for any opinions......sabre67

Hi all is there any suppliers of 73-up spindles other than Cass @ DR. Diff. hes out of stock.Thanks ......sasnre67

Which do you think is stronger, u-joint straps & bolts or U-bolt type with nuts? Opinions please thanks

Hi 1971 Duster V8 looking to buy new center link, any suggestions Thanks FABO

Hi working on 71 Duster and wondering if any one has used a shim behind front spring hanger to center the axle in the wheel well opening and how thick was that spacer? Ill measure for drive shaft after moving axle. Thanks FABO :thumbsup:

Hi guys and gals,being hearing talk about these Delrin LCA bushings anybody here try these or know of someone that has? Just looking for opinions on these as a front suspension rebuild is coming soon for my 71 Duster. thanks in advance, sabre67:coffee2:

I am looking at the Hotchkjs rear springs for my 71 Duster build and wanted to know if any one has used them and their opinions of them. Was wondering how far they lower the rear, and can you get the stance of the car level with a torsion bar adjustment? I don't want a tail dragger, Thanks for...

When modifying uca to offset bushings do you put offset bushings in front and rear of each control arm? So 4 required? (ie 2 bushings per contol arm) newbie here.

Are the LCA bols available to buy new?If so where thanks group (1971 Duster)

Hi has anyone out there tried a set of Mancini +1 leaf springs in their car? Im looking for a set for my 71 duster and wanted an opinion ,thanks

IM installing a Hotchkis front sway bar on my71 Duster,I need the end link brackets that weld onto LCA. Does anyone know who could supply them,or have a diagram and specs so I could get some made? Thanks ps Hotchkis does not sell them separately only supplied in complete kit.