Search results for query: *

Are all 7 screws that hold the rallye dash bezel to the dash frame the same? It looks like the 3 that go along the bottom side of the bezel are definitely chrome 8x3/4 fillister head screws. FA 4074 C listed in mrg's catalog https://mrgusa.com/pdfs/146-147fillis But are the 4 that screw...

I sprung for a new 68 Barracuda rallye bezel and am dismantling the old one and at some point whoever worked on it used this white glue that stays slightly malleable to where I was able to peel it off with my fingers but it was strong enough to hold everything in place. Anyone know of a...

Hey guys I just bought a woodgrain steering wheel with the horn cap and horn cap retainer. Is there a horn switch or something I need to purchase as well? The car I have has an old crappy aftermarket wheel so I don't have an original horn switch. Is there anything else I need to be able...

Just recently put some seat covers on the rear seat and when I install it, I can only get the seat to fold down to about a 45* angle before the cams hit the brackets that the bolts go through to attach the seat to the car. I took pictures of the brackets so I could get them back on the same...

*MW99601G - 1964-69 Mopar - Custom Wood Steering Wheel Kit with Barracuda Fish Logo They make them with a couple different horn buttons but I was wondering if anyone had a picture of one of them installed or any idea of their quality? I really like the look of the rim blow wheel but I don't...

I have a couple I'd like to replace but I'm not quite sure how to get them off without breaking the plastic. This is on a 71 Duster. Anyone have any tips? Thanks.

I'm trying to remove the rear interior trim on my Barracuda to prep and paint but I really don't want to risk breaking anything since I know how expensive this stuff gets. How do you remove the stainless trim that goes around the rear side cargo panels? I saw one screw in the very back that I...

I'm going to have both front and back glass removed from my 67 Cuda to swap over to the 68 trim. While doing this I'm trying to decide when the best time will be to do the headliner. Luckily the glass shop is in my neighborhood so I can just drive it back home without a windshield to complete...

Anyone know where to find those little tiny nuts that hold the console top on? I don't know what you would call them but they go on those threaded pins and keep the console top held down to the console frame. Thanks.

I have a black interior and need to paint the plastic backs on the bucket seats in my 67 Barracuda. Is SEM's Landau Black a good match or are they supposed to be glossier than that?

A few years ago some idiot was getting in the back of my car and he pulled on the front seat with his weight and it kind of pulled the back part of the seat back a couple inches. Last month I was putting new vinyl on the seat and I noticed the two metal hooks in the center of the seat bottom...

I'm redoing the upholstery in my 71 Duster. It just has a basic split bench seat but I can't for the life of me figure out how to take the seat backs off it. I figured there would be a bolt to remove but there isn't. It almost seems pressed in or something with a post going through the hinge...

Hey guys I just bought the dark metallic blue from Herbs because I thought it would match my B7 blue interior and it's too dark. Do you guys know if the 1177 bright blue matches B7? I don't want to waste anymore money than I have to. Thanks...

I can get a hold of a fastback Barracuda 4spd carpet for about half the price as a new one, except the only problem is my car is an auto with a console. The guy claims you can just fold the extra carpet for the 4spd under the console and you cant even tell the difference. Anyone ever do this?

Will a fold down rear seat fit in a non fold down car? The seat is out of a 73+ Duster and I'd like to put it in my 71 but don't know if they're compatable.

Hey guys, does anyone know if these floor mats are really the original type that came with Duster's back in the day? They're at the bottom of page 109 in the legendary catalog. http://www.legendaryautointeriors.com/files/ChryslerCatalog.pdf I've got a 71 Duster and I always enjoy getting...

I took my girlfriends bench seat out of the 67 Valiant to get reupholstered. Ever since then, the passenger side track hasn't stayed put. I took it out and noticed only the passenger side had one of the big springs and the drivers side didn't. Went down to Ace to get two new springs and...

It's my girlfriends car and I want to get her a stereo system for Christmas since it only has an AM radio right now. On my 71 Duster, there were 6x9 holes in the back tray, so I just had to cut the holes in the cardboard type covering to install them. Her car has built in factory looking...

Does anyone here have any pics of some blue buckets in a b7 interior? More specifically the high back buckets from the 70's? I've been thinking about converting from the bench in my car but I'd like to see what it looks like first. Thanks.

I just scored a pair of 64 Dart bucket seats for next to free and I'm trying to find all the info I can on them. I did a search but most of the bucket seat posts on here are 68+. So if I wanted to put these in a 68 or 71, would they work or would I have to make some kind of mounting bracket...