Search results for query: *

  1. E

    Rear drums too tight

    68 Barracuda. 10" drums on an 8 1/4" rear. New shoes and hardware. E brake disconnected at the adjuster. Brake adjusters threaded as far in as they'll go. The drums are tight on both sides. I can get the drums on but they are tighter than I would ever want them and that is with the hardware...
  2. E

    Multiple problems with bleeding brakes

    Just did a drum to KH disc conversion. Went to bleed the brakes and had multiple problems. The proportioning valve I bought from Summit leaked from the top nut so I tightened it down and it improved things but still couldn't get it to stop leaking all the way. It also leaked where the line...
  3. E

    Instuctions on installing bearings/races/seals in KH hub?

    Hey guys I'm reading the Kelsey Hayes disc install tutorial and it just says to run a search on here for an explanation on installing the bearings and all that inside the hub. I've been searching on here but I can't seem to find the information I need on it. Does anyone have a link or set of...
  4. E

    More 73+ disc conversion questions

    I just received a 73+ conversion in the mail yesterday and I'll be going through it this weekend. I want to get everything ready (including suspension kit) so I can just knock it all out at once on my 67 Barracuda. I was wondering what brands of Calipers and Rotors are any good? I'm not looking...
  5. E

    Brake pedal is really stiff

    I put new shoes and bled the brakes on this 67 Valiant before I got it on the road. After driving it for a while, I noticed the pedal is really stiff and only goes down a couple inches. When sitting at a light I was having to wedge my knee up under the column because the pedal was so hard to...
Back
Top