Search results for query: *

  1. 68 CUDA FORMULA S

    [Found!] Looking for two in good shape 1968 Barracuda wheel lip moldings

    I am in need of a driver's side front and a passenger side rear wheel lip molding, the other two are in good usable shape. If you have one or both of them in good usable shape without dents or scratches please let me know, and if you can please post some pictures and contact me with a price...
  2. 68 CUDA FORMULA S

    [Found!] 68 Barracuda FastBack Outer 1/4 window cat whisker clips

    I am installing some of the cat whisker back on the 68 and when I got to the rear outer 1/4 window whiskers the passenger side top clip was broken off. Also the factory whiskers have two clips up there where as the replacement ones only have one clip. I am looking for three clips like these ones...
  3. 68 CUDA FORMULA S

    [Found!] Looking for two 68 Barracuda rear trunk molding clips

    I am looking for two of these clips that hold on the rear trunk molding for my 68 barracuda, the ones with the two studs.
  4. 68 CUDA FORMULA S

    [Found!] Upper kick down rod

    I am looking for one of these small block upper kick down rods in the pictures to use on my 66 273 4bbl, if you have one for sale let me know. Thanks Bob
  5. 68 CUDA FORMULA S

    [Found!] Looking for black arm rests

    I am looking for one nice black front arm rest and one nice black drivers side rear arm rest for my 68 barracuda fast back. I do not need the rear ash tray or the ash tray bezel just the arm rest it's self. I will also need them shipped to 48346 Michigan. Thanks Bob
  6. 68 CUDA FORMULA S

    [Found!] 68 Barracuda rear fold down seat lever spring

    So the release lever for my rear fold down seat back in my 68 Barracuda was on the very sloppy side, so I took the seat apart to see why. I found the release rod was bent, the nylon grommet was not in the correct hole, and the lever return spring is broken. Has anyone ever seen these re-popped...
  7. 68 CUDA FORMULA S

    [Found!] Black Carpet Pieces

    The PO of my 68 barracuda fast back had cut the rear carpet strait across from under the rear seat leaving the sides of the rear seat bare. I am looking for two pieces a minimum of 10" long and 6" wide to cover the void. If any one has two pieces of black loop carpet or even a piece at least 20"...
  8. 68 CUDA FORMULA S

    [Found!] cam's, bearings, and set screw's for a 68 barracuda rear seat back.

    I am looking for a set of cam's, bearings, and the set screws that hold the cam's to the bar for my 68 fastback barracuda rear fold down seat back. If you have them please let me know. Thanks Bob
  9. 68 CUDA FORMULA S

    [Found!] New Black Console Carpet Strips

    Thought I would check to see if anyone had a new black console carpet strip for the automatic console in my 68 Barracuda they are looking to get rid of before I order one. Thanks Bob
  10. 68 CUDA FORMULA S

    [Found!] 66 273 4bbl bell crank assembly

    I changed my 66 with a 273 from the 2bbl over to a 4bbl using the correct commando 4bbl intake and adding a 650 Holley, I have not been able to get the kick down to work since. I have seen the post with the different bell cranks from a 2bbl and the 4bbl and I do have the 2bbl bell crank mounted...
  11. 68 CUDA FORMULA S

    [Found!] 8 3/4 rear axle yoke strap bolts

    I am looking for 4 of the rear axle yoke strap bolts for the 8 3/4 rear end in my 68 barracuda. I have the straps I just need 4 bolts. Thanks Bob
  12. 68 CUDA FORMULA S

    [Found!] Small Block 727 Trans To Engine Brace Drivers Side

    I am looking for a drivers side trans to engine brace for my 68 barracuda with a 340 and a 727 trans, the one I am looking for is in the picture on the left side and I believe it is approximately 11" long. Thanks Bob
  13. 68 CUDA FORMULA S

    [Found!] Flaming River FR1506P Steering Coupler

    Looking for a Flaming River FR1506P steering coupler, If you have one to sell let me know. Thanks Bob
  14. 68 CUDA FORMULA S

    [Found!] Flaming River FR1506P Steering Coupler

    I am looking for a Flaming River FR1506P for my 68 Barracuda with power steering to clear the Headers. I have found a few on line but don't really want to give up my first born. If you have one and are not going to use it let me know. Thanks Bob
  15. 68 CUDA FORMULA S

    [Found!] 68 Barracuda Upper Rear Seat Hinge Bolt

    I am in need of one upper rear seat hinge bracket bolt. It's the one that holds the lock and un-lock plate to the side of the upper rear seat, the one with the release lever on my 68 barracuda. Look at the picture it's 1 1/2" long and has the letters SEMS on top of what looks like a large T and...
  16. 68 CUDA FORMULA S

    [Found!] Heater Resistor Plug and Fuse Box Bolt

    I finished rebuilding my 68 Barracuda A/C and heater assembly the other day so it was time to start on the dash assembly. While I was putting everything together I noticed that the heater resistor plug was a little melted and dis figured. These ends are used in a few more places on the dash...
  17. 68 CUDA FORMULA S

    [Found!] Small Block Rear A/C Mounting Bracket

    I am looking for the rear air compressor mounting bracket and the two bolts that hold it to the compressor for my 68 Barracuda small block. Look at the pictures, this is the bracket that I am looking for. If you have one let me know along with shipping to 48346 Michigan. Thanks Bob
  18. 68 CUDA FORMULA S

    [Found!] Heater Hose Water Valve.

    This 68 Barracuda is a factory A/C car and I have found just about everything that I need to put it back to original. The one piece of the puzzle that is missing is the heater hose valve that's mounted on the passenger side inner fender, I am told that it is not reproduced. My question is #1...
  19. 68 CUDA FORMULA S

    [Found!] small block 727 dust shield inspection cover

    I am looking for the small inspection cover and bolts for a small block 727 dust shield. Please post a picture of what you have and PM me a price shipped to 48346 Michigan. This is what it looks like. Thanks Bob
  20. 68 CUDA FORMULA S

    [Found!] 67/69 small block alternator brackets

    Looking for the alternator brackets, spacers, and bolts for my 68 Barracuda 340, they don't have to be pretty I can blast and paint them my self. Please post a picture of what you have and PM me with a price plus shipping to 48346. This is what they look like. Thanks Bob
  21. 68 CUDA FORMULA S

    [Found!] Lower Control Arm Stiffening Plates

    I am going to purchase a set of lower control arm stiffening plates for this 68 barracuda, just wondering if anyone has a set they want to get rid of and are not going to use before I order a new set. Bob
  22. 68 CUDA FORMULA S

    [Found!] 1968 340 Choke Assembly

    I am looking for a stock choke assembly for my factory 1968 340 intake manifold with the 4 bbl Carter AVS Thanks Bob
  23. 68 CUDA FORMULA S

    [Found!] 1968 Rally Dash Instrument Face Plate and Glove Box Door Plate

    I am looking for a nice rally Dash face plate with AIR and glove box plate. I don't want to give up my first born so Let me know what you have. Thanks Bob
  24. 68 CUDA FORMULA S

    [Found!] 1968 barracuda tail light assemblies.

    I am looking for a nice set of 1968 Barracuda tail light assemblies for my car. Don't need to be perfect it's going to be a driver but I don't want housings that are pitted or lenses that are cracked, I already have that. If you have a set and I don't have to give up my first born let me know...
  25. 68 CUDA FORMULA S

    [Found!] 90 Degree Oil Adapter Bolt

    I need a bolt for the 90 degree oil filter adapter, I have my adapter for my 340 but my bolt grew some legs and now I can't find it. Let me know along with shipping to Michigan 48346. Thanks Bob
  26. 68 CUDA FORMULA S

    [Found!] Looking for a 727 tail shaft with the humps

    So I picked up a 1976 small block 727 that was in a Little Red Express Truck. It had a column shift and this 68 Barracuda has a floor shift. So I am looking for a long tail shaft for this 727 with the two humps behind the trans mount so I can mount the bracket. Thanks Bob
  27. 68 CUDA FORMULA S

    [Found!] Trans Cross Member and Mount

    I am looking for a trans cross member and trans mount for this 1968 Barracuda with a 727 trans. Please let me know what you have and a price along with shipping to 48346 Michigan. Thanks Bob
  28. 68 CUDA FORMULA S

    [Found!] Looking for a Member Near Waupaca Wisconsin For Parts

    There is a guy in Waupaca Wisconsin who is on the Green Bay Craigslist that has a 1968 intake and carb for my 1968 340 Barracuda. I can not get this guy to ship the parts to me and was wondering if anybody up there would be willing to pick it up and ship it to me. If so please contact me and I...
  29. 68 CUDA FORMULA S

    [Found!] timing cover and balancer

    I need to change the timing cover and balancer on this 1971 340 to the 1968 cover and balancer so I can use the rest of the correct 1968 parts, if you have them let me know along with shipping to 48346 Michigan. Thanks Bob
  30. 68 CUDA FORMULA S

    [Found!] 2536771 CAP 4BBL Intake Manifold Port Plug

    I am looking for the intake manifold vacuum port plug that was used on the CAP California 273 CI 4bbl intake manifold. If anyone has one lying around or if anyone knows where there might be one with the plug in it Please let me know. Look at the pictures, the first two are of my manifold without...
Back
Top