Search results for query: *

So I’m working on getting my 7/8” Wilwood clutch master setup. I’m only getting 9/16” if throw and can’t figure out why. I finally have my friend push the pedal down while I watch and low and behold. The firewall is flexing 1/2”-3/4”. I thought I measured the throw right. Now the only fix I...

As the title says, I've got a 6.1L controlled by a stock PCM and tuned using HP tuners. The harness is a Hotwire harness. There's no wire as far as I can tell for fan output. I've got both fans on separate fuse and relays already just need a controller or the PCM to turn them on and off. Can...

Car was started without a crank sensor as it's the wrong one or bad. New one on order. Login - Dropbox Riddler

Finally broke down and purchased a wiring harness and PCM. Reading over the instructions and found alot of wiring I've already completed in my American Autowire harness. I've got a few questions... For the wires down below... Are they needed to run the car or can I run the fuel pump using...

Had my local shop call Hotwire as they have dealt with them for a new hemi swaps. I have a 2006 6.1L Hemi and a T56. My local shop was told the PCM I should use is a 2009 Challenger 6.1 manual trans pcm. I already have a 2004 PCM and was told that I should use the 2009 PCM as there is a...

Hey guys, I'm still working with a local company to create plug and play harnesses and use stock PCM's with HP Tuners. However we're having some issues with pcm communication. From what I understand my 2004 Ram PCM might not be flashed for what we need. My question is who or where can a PCM...

I have a 6.1L Hemi and a champion radiator that has both inlet and outlet on the passenger side. I found a few posts and went to NAPA and bought some hoses, which don't seem to fit. Does anyone have the same radiator and can help with which hoses they used? Thanks, Riddler

Lets start with fluids. The car is a 76 Duster with 6.1L Hemi and 96 T56 with a 8.75 rear end. Here's a list of the fluids I put together. Oil: Mobil 1 - 0w40 OR Rotella T6 - 5w40. From what I understand I need seven quarts from dry plus another six quarts due to the Milodon oil pan...

What's everyone doing for air intakes? I'm thinking about trying this intake with my 6.1L. http://www.ebay.com/itm/311479764452?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT Riddler

Which carpet is everyone using for T56 swaps? I know my center hump is slightly larger than the automatic one I removed. Which carpet fits better? 4 speed or auto? Any vendor to choose that leaves lots of extra on the sides? I'm looking for a black carpet and want to have enough...

I'm collecting wiring supplies and getting ready to rewire my entire car. I'm using an AAW Power Plus 20 kit. Kit is pretty complete other than ground wire. I'm working with Affordable Fuel Injection to have another vendor to supply engine wiring harnesses and the plan is to use HP...

I'm planning more of my build. I'm trying to determine which is the best fit for the AC condenser. I've got a 6.1L Hemi with stock compressor and I'm using a Vintage Air evaporator box. The rad I have is a champion 26" unit with electric fans. Does anyone have a similar setup? If so...

I've been looking into a bunch of wiring kits to rewire the car. So far I'm liking EZ Wiring but concerned it's designed for chevy. Ron Francis has a lot of wire and some backward wiring. Anyone else have any suggestions. I'm hoping to stay under $500. Please include some links and...

My 06 Hemi has huge studs all the way around on my valve covers. I know I'll need one stud for the milodon dipstick after I shorten it. Anyone find another bolt that looks better than these huge studs. How's about grinding them down and painting them. Riddler

I think I've settled on this rad as it seems to fit my build and budget the best. I can get this rad with 12" dual fans for $240 shipped or can get the rad for $380 shipped with the same dual fans but with a shroud. Is a shroud really worth another $140? Anyone know of a place to get a...

Just wondering what everyone has done for running fuel lines? I've got 2 options to consider. Hard line with adapter AN fittings or braided nylon/steel PTFE hose the entire run. Both would work but I think the hard line would be easier to secure to the car without it coming down in spots...

First I want to thank RealWing with the pictures and such from when he did his pan. I assumed I would have the same issues. Some I did have, some have been corrected. First off my 6.1L dipstick is too long. Doesn't bother me. I'll just use some nuts and washers. Second was the...

Anyone know a place thats sells the harness for a 6.1L with manual trans for a deal? Any amount of savings helps. Same with a set of TTI Headers for the 6.1L with alterktion. Does TTI have any dealers or do they only sell themselves? With the Canadian dollar getting worse, any little...

Hey guys just sitting here bored ready other guys build threads. I'm making this post to help others as well as myself. Let talk oil pans and find out which ones work for different applications. I'd like to get pictures and info for each of the pans. Year and Model of Car: Factory K or...

Looking for some help and narrow down info into one thread for myself. I was going to install a 5.7L into my Duster but found a 6.1L for an amazing price. I have just a few things I need info on. Starter - T56 - I'm thinking mopar mini starter Headers - 6.1L - TTI for AlterKtion Wiring and...

Here's the link http://www.forabodiesonly.com/mopar/showthread.php?t=241570 Riddler

I'm working on planning out the rest of my build. I'm at the firewall and need to figure out which HVAC box to go with. I'm can use anything but I'd really prefer to stick the OEM Hemi AC Compressor and then use the Bouchillon underhood kit. Has anyone done an install like this? If so care...

Hey guys since this forum has pretty much become the modern hemi swap / pro touring forum I was wondering if anyone has any suggestions for a modern wiper motor that works with the stock wiper linkage? I'm leaning towards shaving the wiper motor area off but if anyone has a small unit I can...

Here's the thread Cuda asked for.... Any chance you can tell us what you designed this around? From my memory it's a AlterKtion with T56 trans... What else do we need to mindful of if we choose to order one? Riddler

Using this pic I found... How much trimming is done for this? Can anyone give me a measurement? I'm gonna trim it out while I'm working on the engine bay. Riddler

Hey guys I had some hydroboost brackets cut for the A body cars. I chose to do this as I figured I could offer them at half the cost of other manufacturer's. I chose to keep them raw as some guys would want to weld them in, some paint, some chrome, powdercoat, etc etc. These are made out of...

Not sure if you guys have seen this, but it looks great. I'm sure it works well also. http://www.xvmotorsports.com/products/detail/index.cfm?nPID=272 Riddler

Lots of reading and people say it's not possible. I'm not sure I want to run non-power brakes with the Wilwood Dynalites. What is everyone else using for brakes (complete systems)? Does anyone have pictures of a Hydraboost setup with a Hemi installed? I want to know what it takes as I like...

Getting ready to mock up my 3rd gen Hemi and T56 into the car and I'd love to see what some of the others have used for trans crossmembers and also the floor. My goal is to be able to install factory 4spd carpet and I know I've seen it before, just can't find it. Riddler

Well today I was going through the 2 hemi's I have. One is a truck motor and the other is a car motor. I bought the truck motor from a running rollover. Went to take the harmonic balancer off and broke a bolt in the crank. I've even had a machine shop work on the crank and it will need to...