Search results for query: *

Here is a great 413 Industrial Block out of the Oil fields of So Cal. Never overheated and low hours run only on Propane. Still standard and nice Hot Tanked/Magged/Pressure Tested I bought six industrial Blocks in the late 1970's AND this particular block Sonic tested the very best of them...

These are the original part # L2406 Powerforged Pistons I believe I have had them on the shelf for the best part of 50 years. I very much prefer them to the supecede number TRWs from the newer years. I believe the tolerances and metallurgy to be superior to the Chinese forged "finished in USA"...

Here are three very nice sets of Crane Roller Rockers. These have been in the shop since the last century. The are the best American Old School that Crane ever Built and the metallurgy and quality is better than the 1,500/2000 priced rocker you find today. These were never driven on the street...

My very close friend and the man who has prepared most of my cylinder heads for all my race cars has been sadly forced to close his shop due to Health challenges! Here is a trailer load of his selected Mopar heads that he has collected to prepare as ordered by racers. All have been Hot...

Here are a bunch of Torqueflite Transmissions 2892031 67/68 383 HP (I think out of a 67 Cuda Form S) Sold 3515846 71 383 HP $295.00 3515852 71 318 $275.00 SOLD Hard to find: 2801541 1967 Dodge RT 440HP (Correct for 67/68 RTs and GTXs) $375.00 904 Slant 6 / 904 $250.00 I will deliver for...

Brand New and Never out of the Box!! This in my opinion is the best ger drive that I have ever used. I received it in 2001 when they were American Made with America Steel and Machine Work! I much prefer it to the new Chinese Milodon Junk or anything else that is currently available on the...

Very Rare and Nice 440/426 Hemi Distributor Never Driven on the street or really a lot of race miles Locked and Tested/Prepared by legendary TriCity Performance This distributor was on the Max wedge 426 A/SA that got all the way to the final round @ Winternationals a few years ago. Impossible to...

I found this back on the shelf that I did not know existed. It is the legendary 9800 Performance Carter Superquad. These are calibrated and designed without the emission junk on the production carbs for High performance. They require no modification to the circuits the original carbs do to run...

I found this in the shop last week It is a performance Thermoquad 9800 series The best HP Thermoquad for high performance applications It is a direct bolt on designed/calibrated especially for Mopar applications It is one of the very few I have every seen! I have inspected it and it is...

Here are a bunch of Torqueflite Transmissions 2892031 67/68 383 HP ( I think out of a 67 Cuda Form S) $295.00 3515846 71 383 HP $295.00 3515852 71 318 (904) $275.00 Also 904 Slant 6 $250.00 Hard to find: 2801541 1967 Dodge RT 440HP (Correct for 67/68 RTs and GTXs) $375.00 I will deliver...

I found these in my stack of Thermoquads on the shelf! 6139 is 72 340 Auto 6340 is 73 340 Auto I will take them apart and make sure they have not been monkeyed with or missing any parts and work freely. I will adjust the Floats and Air Door and put back together ( I am not rebuilding them =...

Here is a New Old Stock (Thinking 15 to 20 years) McLeod Steel Flywheel It is 28 Lbs SFI 1.1 Safety rated with sticker in place 10/10.5/10.95 Clutch Patterns B and B or Diaphragm Has provision for counter weight for cast cranks In original dusty box. 130 Tooth Gear Reduction Starter Fitment...

Nearly Impossible to find 9800 "Super Quad" Has been on shelf for 40 years. Everything Complete and Moves freely as it should Shafts are tight with no perceptual wear! The only modification was that I installed a bracket to adapt it to Mopar Carb linkage and Kickdown lever. As with any carb...

This was the best Hydraulic Hot Street/Drag cam I ever tried. It has about 10 passes on it before I went to a solid roller. It has the good old school American Lifters that are hard to find. It has the correct springs/retainers/keepers included. Add: $50. If you want the 3/8 Chrome Moly...

Here is an old now longer being made MI 4500 Intake One of my friends many years ago bought it and put it on His 400 Trail Duster against my advise! Needless to say, it was a disaster deluxe on his stock street truck and did not stay on long. It is in great shape and one of the best manifolds...

Bolted on but not run since powdercoated Rear sump for optimal oil control 6 Quarts Fits ram trucks/vans Fits cars only with rack and pinion $95.00 Plus $26. Shippping/Insurance

NOS (1/2/2005) Powerforce Degreed 0/60 to set total timing Out of box for pictures $75.00 Plys $22 Shipping and Insurance

Brand New Old Stock Milodon 360 Oiling System Built back when they were all built at their So Cal Plant Also fits many "R" blocks Does not fit 318/340 8 Quart #30985 PU #18460 Tray #32230 This Pan is out of stock everywhere till who knows when? It is designed for Dodge Ram Trucks/Van But I use...

For A Engine! Here is a NOS old Mallory HP ultimate performance distributor It is in original dusty box. It has the Magnetic breakerless (MBI) pickup. Also has tuning kit with different springs to tailor the advance curve. Plus a kit to adjust the amount of advance from 14 to 28 degrees in 2...

Rare NOS Mopar performance (On the shelf in shop 30 years) This one features an Adjustable Vacuum Advance (Per Mopar) and a optimal advance curve. It is built in the USA and extremely hard to every find in this condition. I tried it on my 383 Valiant for a test and it ran smoother and with no...

Here is a 30 year old plus NOS Genuine Conversion Kit (P3690426) (3/15/92) Date on the box. This includes the coveted Early excellent (US Made) Orange Box. It has the Wiring harness and hardware package. It has the Mopar Performance P3690430 with the most desirable advance curve for a street...

Very Rare and Nice 440/426 Hemi Distributor Never Driven on the street or really a lot of race miles Locked and Tested/Prepared by legendary TriCity Performance This distributor was on the Max wedge 426 A/SA that got all the way to the final round @ Winternationals a few years ago. Impossible to...

These Pistons will give you 9 to 9.5 compression ratio with stock Iron heads. They are an accepted part # for NHRA Stock Eliminator for 72 or 73 340 Stockers They are stock balance and should not require rebalancing your engine. They are really very low use and Nice. They would be great for a...

This was on my Son's original 340 Duster4 Speed for Six Months before we found the right number AVS for it, It is nice / crisp and lean for a street car that is running through the muffler. Manual chock. $160.00 Plus $24.00 shipping/Insured

Here is a set of original when Schumacher\produced Lazer Cut New in box Motor Mounts. The company that bought them out is having issues getting the reproduced. The owner is my friend and I have been waiting for a set for many months! We just found these today in the shop!! These are the original...

I moved a box and found four 1973 340 Automatic Thermoquads. They have been in the shop since somewhere in the 70's All shafts are tight and everything works as it should. I have two 6319S and two 6340S They are totally original and not messed with at all. I would suggest putting a kit in them...

I found these in the shop today. They are new 360 Stock replacement pistons that are .040 over (4.040 Bore) This is an easy size to find rings for as it is standard 340 bore. These are a quality USA made piston (I believe Silvalite was the vendor) that has probably been in the shop 35 or 40...

Here is a set of 72/73 OEM Factory Pistons They are 9.5 Compression (.055 Down in Deck) with a 65 cc head. These are a genuine Mopar factory piston and way better than the Chinese Junk you will find in replacement pistons anymore. These OEM pistons were superior to most aftermarket pistons...

Here is a nice virgin set of 1971 exhaust manifolds that have been on shelf since 70's in my Shop. They have no damage or modifications. Flapper is intact but will need cleaning as it is stuck after sitting on the shelf for 50 years. $850.00

Here is a 340 Distributor that has been on the shelf since the Mid 80's IBS - 4015A Tag # 2875105 Prestolite Vender Normal Wear that you would expect on a part this old But a very hard to find part that is rebuildable $250.00 Plus $19. shipping in USA