Search results for query: *

This car belongs to one our local Mopar group. He bought the car in 1977 and it now is on it’s third vinyl half top. It currently has a replacement 273, but he has the original motor. He wears a motor out, the swaps in the waiting rebuilt. The car currently has approximately 700k on it. 273, 10...

We picked up this 72 Swinger some time back and it had some issues. It was immediately apparent that it had a valve train problem from the noises it was making in spite of the freshly cut off muffler to try and hide it. It was a completely stock 318 two barrel car with single exhaust. Sure...

This one is multiple Mopars on a pretty fun road from Prescott to Wickenburg AZ. On our way to a car show. A 65 Dart 273 A 66 Dart wagon A 71 Dart Swinger And my 73 Dart Swinger

Just getting more familiar with some of the settings. Not really meant to be a serious video post. Thanks

A year old video, but good information on crappy aftermarket parts sold as “performance”

Been looking for a windshield washer reservoir for quite awhile now, but not a stock one on the drivers inner fender. I have way more room on the passenger side. Also wanted a good flow (better than stock) and have drilled the squirters a bit larger as well as upsized the tubing and pump. As...

Just a basic no bla bla bla, no music drive in my daily driver Dart.

Not mine, as a family member sent me the info. Car is in Williams AZ.

Yea, Mopar general discussion because because everything in general is getting changed and upgraded. I’m sure some will ask about some of it. This is my buddy Mike’s car. It was a mostly stock 71 Dart Swinger, 318/904 car. Now it’s a built 440/727, Gear Vendors, Hemi Denny K member with power...

Of the tires and wheels I use for abusing. If you think burnouts are a waste, just don't watch.:D If you like Mopars & smoke consider subscribing to my channel Mopars4us. This is the completely un edited version for you guys. Enjoy the video and be safe out there.

I messed the video up last time, so here it is.

They are up on Youtube along with a new video explaining what rotor phasing is, and why it should be checked. Those are here, and thanks for checking them out. Mopars4us Mike was really exited to show you guys his Mopars.

Just a couple of quick shots of Mopar David's truck that he just finished. A few weeks ago this was just a motorless wheelless shell, but now it has a 360, and turbine wheels with mud tires . It's a manual 4x4 and has a tilt wheel with more modern split bench and center console. We also have...

The Mopars4us group wants to do some burnout video's and I would like some thoughts on the subject. Do you think it's a good idea to involve the local PD in this? The PD here knows my car well (in a good way) as they have stopped and asked about the car and have been genuinely interested, with...

Just thought someone may need something this guy has. Some of the prices might make it worth paying the guy enough to entice him into shipping. Mopar parts, CHEAP! - auto parts - by owner - vehicle automotive sale

One of our Mopars4us group (Mopar David as he is called) has been a collector of Mopar related goodies for decades. He must have 5,000 Hot Wheels cars, trucks, vans and paraphernalia. I am converting a video of some of it right now, but in the meantime I thought I would post a couple of pics of...

I have an update on the Mopars4us Youtube channel progress. THERE WILL BE BURNOUTS! for one. :lol: I talked to the other guys and they want to do burnouts, so I will also.:D About Rob and his Mopar stable. Rob has my extra set of wheels and cheap tires I forgot about because I loaned them to...

This is how.

The original discussion on this is here: To separate the idle cam from the choke Some pics of the finished controller I had to build are here: Part for manual control of the idle speed from inside. This is exactly how I wanted it to work when the weather isn't cold enough to set the high idle.

I did this a few years back and I still have to see it again once in awhile. I thought I would post it again for the new guys and gals.

You may have seen my thread on loosing the ring off my balancer after a blast through the mountain roads on the way to the small town Jerome AZ. I posted a video where on higher RPM deceleration I was getting some inside the exhaust explosions from the passenger side header having a small hole...

I got the new PRW Performance harmonic balancer late yesterday and put it together this morning. A couple of video's for you guys and gals. The engine video was taken while burning off the passenger side header after I pulled it and fixed a hole between the four tubes right at the collector...

Layed into the Dart pretty good in places up on the mountain and it looks like it broke the flex plate. Limped it home with a bad vibration and scraping noises. Now I have something new to do.:D The video is what I was doing when it let go, but the pop was a exhaust pipe explosion from a small...

The Dart developed a nasty rattle in the back end going over bumps in the road yesterday. Gotta get under there this morning and find out WTH. Since I just swapped rear ends a bit ago I guess a good check over is in order anyway.:rolleyes:

Why is it so hard to fix something that isn't broke? I have a "uni ped" 7.25 rear end with 2:73 gears behind a mildish 5.9 Magnum and 42RH overdrive trans in my Dart and have driven it thousands of miles with zero issues for years now. I could literally stop at the gas station, fill up and take...

I live about 80 miles North of Phoenix and will be driving over to Kingman AZ on Saturday morning 10/26 to be there for the finals on Sunday. Anyone else?

I know what the 340 is as a motor and what it is known for, but people always ask if my Dart has a 340 in it? (pretty much every day) and WAY more than the Hemi question. If I had a running 340 I'd sell it in a flash and build a bigger better Magnum and stouter transmission. Or put the money...

I ran across this recently and had pretty much forgotten about it. Members car pictures I put together with the music. www.letsgocomputers.com/movies/moparsbadtothebone.wmv

This is my Magnum cold start every time. Electric fuel pump, return fuel system with an Edelbrock 600 electric choke and HEI ignition. I turn the key on and give it a couple of seconds to make sure the carb is full, twice to the floor with the throttle and BAM. The high idle is set so it really...

In San Luis Obispo, CA More pics in the add. ►1965 PLYMOUTH BELVEDERE HEMI 588 CI MOPAR SUPER STOCK A990 TRIBUTE►