Search results for query: *

Used small block pushrods. These are all straight, have been cleaned up, and the oiling holes are cleaned out. They're out of a '89 roller cam LA 360. Length is "about" 6.750 inches. I don't have a pair of 12" vernier calipers, so I can't get a precise measurement (refer to photos). Price is...

New big block aluminum water pump housing - $70 + shipping (Paypal F&F, postal money order, or check will work). Located in West Sacramento, CA. PM me for a shipping quote. I'm guessing it'll be around $20 or so.

Cast iron big block water pump housing. #3698468 casting with passenger's side radiator hose. It's pretty crusty and will need a good clean up. $45 shipped from West Sacramento, CA (PP F&F, postal money order, or check). Or $20 local pick up.

I picked this up for a A518 swap, but turns out my non-lockup A518 takes a regular 727 yoke. This was used with a 46RE. Not sure if it'll fit later lock-up 46RH's. Uses a 7290 u-joint. $40 shipped from West Sacramento, CA (PP F&F, postal money order, or check). Or $20 local pick up. If desired...

Used small block pushrods. These are all straight, have been cleaned up, and the oiling holes are cleaned out. They're out of a '89 roller cam LA 360, so they're probably too short for a HFT LA motor, I'd imagine. Length "about" 6.750". I don't have a pair of 12" vernier calipers, so I can't get...

Used small block pushrods. These are all straight, have been cleaned up, and the oiling holes are cleaned out. They're out of a '89 roller cam LA 360, so they're probably too short for a HFT LA motor, I'd imagine. Length "about" 6.750". I don't have a pair of 12" vernier calipers, so I can't get...

Small block 1.5 rocker arm assemblies. As far as I can tell, these are the older style Comp "magnum" rocker arms (#1420) that aren't produced anymore. They are not bushed, and from my research, are chromemoly and are not recommended for open vale spring pressures over 350lbs. Please note that...

I have a pair of stock "308" small block cylinder heads that I'd like to get off the shelf. These heads came off a running '89 360, but I'd consider these cores. Local pick-up only at this point. I have no idea how to ship these and I'm sure it would be cost prohibitive anyway. Located in West...

I have a SB timing cover that's taking up space that I'll never use. It came off a mid-80's 318, so it has the front install seal. It appears as though the balancer ring slipped and made contact with the timing cover at the timing marks (see photos). Luckily, it didn't rub through. I'll also...

A/C receiver drier bracket. Comes with attaching hardware as shown in photo, but no strap. I'm not sure what years and models this fits, but it came with my 68 Dart, so I'm thinking it'll at least fit '68 model year A-Bodies. $10 shipped in the US, or pick-up for free in West Sacramento, CA.

Power steering coupler in decent shape. Just cleaning off my work bench and hate throwing stuff away. Comes with shoes shown in picture. $25 plus shipping. Located in Sacramento, CA. Thanks.

Fan shroud for 22" radiator. Number on it is 3673821. One edge has been trimmed a bit for hose clearance I believe, but does not affect function. (as seen in picture). I bought this and I couldn't get it to work for my application. PM with any questions you have. $75 plus shipping from 95814...

Lower steering column support bearing from a 68 Dart with power steering and column shifted automatic. In good shape. Comes with retaining bolts. Located in West Sacramento, CA. $20 shipped in the US.

Used set of head bolts. Taken off my 340. Short ones are hardware store grade 8 w/ washers, long ones are stockers. Good for budget build. Hate to throw these away. $16 shipped.

Anyone want this 90 degree oil filter adapter and bolt? Good condition. $30 plus shipping from 95691.

I've got a pair of Mopar 340 Hi-Po manifolds that I just took off my 68 Dart in favor of a set of headers. I believe these are for 68-71 340s, but correct me if I'm wrong. The passenger side manifold is in good shape. Part # for that one 2863549. The drivers side one has a crack that someone...

First steering coupler is for a manual steer box. What you see is what you get. Shoes, roll pin, and other parts included. Spring clip NOT included. Please note- this coupler is off a 65, so it uses the shallow spring clip as outlined in the following link: Asking $30 plus shipping from...

Used 3.23 gears for a 489 Case. Good useable condition. I recently swapped to a set of 3.91s and no longer need these in my garage. I measured backlash before dis-assembly at .0075". $70 Shipped in the US via flat rate box.

AC condenser off a 68 Dart. There is one part that has some damaged fins as seen in the pictures. $40 plus shipping. PM me in interested. Thanks!

Sold!