Search results for query: *

  1. pishta

    git 'er done!

    Found on the web
  2. pishta

    Inner tie rod puller

    Are these weird crows foot type insert tools required to pull the inner tie rod or can you grab it with a pipe wrench? I see a few more designs but I'm not sure I even need this on an SC400 as the rack is in front of the K, on the bottom. Looks like good access from internet pic.
  3. pishta

    New Mopar power steering leak

    2012 Dodge caravan 3.6 FFV...pretty good power steering leak passenger side at the pump. What are chances its the pressure side or the return side? Maybe the fitting? Just started yesterday, 6" puddle overnight...don't even know how to attack this. Advice, warnings? :BangHead:
  4. pishta

    Front hanger spacers

    Are these common? I need about 1/4 inch more clearance from the front lip of the rear fender on my 8 3/4 rear 65 with these big 235/75R15 series tires so I am going to get a 1/4 plate and just use them as a spacer in front of the front hanger. I know it'll move the driveshaft out 1/4" but I got...
  5. pishta

    Rebuilding a shock...doable at home?

    I have a pair of older Aldan street rod shocks that are pretty soft. They have a lifetime warranty (for original buyer) so I asked how much to get them rebuilt. $70 for the pair so I dug a little deeper and took one apart. As far as I can tell , there is one friggin O-ring in there! Around the...
  6. pishta

    McPherson struts

    Do the rotators on the top (mounts?) Ever go bad? I'm getting a clunk over sharp bumps in my SC400 and the LCA and ball joints seem to be fine. Hope it's not the LCA as they are not rebuilbable and new ones are almost N/A.
  7. pishta

    Shock extension purpose

    Had a good post going about shock extensions and what they do, but it was in the wrong forum so Ill bring it out in the proper section: Shock extensions were used to extend a stock rear shock length to deal with SS springs or shackles, increasing the static distance between the rear axle and...
  8. pishta

    Aldan shocks...?

    Are these any good? Forums say they still rebuild them for free! Trouble is the ones Im looking at are only 12" eye to eye with 3" of travel...wth? Maybe Model "A" front suspension hotrod parts?
  9. pishta

    SBP SG 8.75 Wheel stud size?

    Can anyone tell me a good part number for a rear wheel stud for a 67 Barracuda 8 3/4 w/Sure Grip? I see alot of 1/2's but its a 7/16 if its a small 4 BC...If not a part number then maybe the knurl diameter..Im looking for a 1/2 longer stud or a 3" stud I can cut down to fit my closed nuts...
  10. pishta

    adapting rack and pinion

    I want to run a rack and pinion under the rear of my oil pan between the sump and the trans and utilize the same spindles that I have now. Has anyone ever done this? I dont want to buy a kit, just tips on retrofitting a common rack (maybe a 240SX Nissan as I heard they are good for retrofits)...
Back
Top