Search results for query: *

I'm looking for a set of standard bore 354 Hemi pistons, anyone have anything? I'm preferably looking for the taller, higher compression pistons, that measure 1.95" from center of wrist pin to the top of piston. Quite honestly, if you just had a partial set, I would buy that too. The lower...

Wanted : 1962 - 65 A body speedometer cable Must be like the one pictured, with the one end that just presses into the transmission. If yours has 2 threaded ends, it's not the one I want. Thanks!

Wanted: 1965 A body V8 gas pedal and linkage, all the way to the carb. I need all the hardware, brackets, everything to put a V8 pedal with linkage in my '65 Valiant. Thanks

Wanted : '65 Valiant front turn signal lenses, mine aren't great. Also need the turn signal lever, mine is quite rusty. Anyone?

I'm redoing a dash from a '68 Barracuda and I need the ash tray, this one is missing. Color isn't important, but it needs to be from a '68. It's 5" wide, whereas a '67 is 6" wide. I'm unsure on '69s. Please PM me with what you have. Thanks, Mike

Vancouver Island members, do any of you have a set of A body 4 speed pedals? My cousin has a '68 Dart GT that he's doing a 340 4 speed conversion on and the pedals he bought years ago turned out to not fit, not sure what they're from. We're trying to get his car ready for Mopar Madness on...

I'm looking for this Direct Connection license plate. I know YearOne has them, but they want $45 to ship it to me. I'm in Parksville, BC, Canada. Whatcha got?

Hey guys, I'm looking to buy 4 big bolt pattern (5 x 4.5) Mexican hat center caps for my rally wheels. These were the pre '73 style. Let me know what you have, thanks. Pictured is what I'm after, just the cap though. Mike

Hey everyone, last year Carmen and I went on a road trip across Canada and the US in our '75 Chevy G20 camper van. We bought bumper stickers as we went, but sometimes we didn't stop anywhere that sold them, or for whatever reason didn't pick any up. What I need from you is a bumper sticker from...

I'm in need of a working clutch fan. Anyone have one they'll part with? Shipping to Parksville, BC, Canada, postal code V9P 2C5. Thanks!

My cousin is building a '66 440 for his 72 Duster and is looking to run ductile iron adjustable rocker arms. Anyone have a set?

A friend of mine installed a super six intake and carb he got for free. He needs the kickdown linkage/bracket, and an air cleaner to fit. Let me know if you've got anything, give me a price, and I'll relay the info to him. Thanks.

I need the passenger side splash shield for my 65 Valiant V200. It's ok if it's got some pin holes, anything is better than nothing. Shipping to Parksville, BC, Canada Postal code V9P 1L6 Thanks!

I need the hood emblem for a 70 Dart that says "Dodge" in script. Must be in nice shape, and should have 4 studs. Also need the same for the trunk, but with 2 studs.

I need the linkage from the steering column down to the transmission as well as brackets to fit a 66 Dart / Valiant. Shipping to Errington, BC, Canada, postal code V0R 1V0. Let me know what you have, thanks.

I need the drivers side eyebrow trim for a 72 Dart. It has to be the shallow style, nice please, no pitting. It's the piece that meets up with the hood trim. Shipping to Errington, BC, Canada, postal code V0R 1V0. Thanks.

I need the passenger side eyebrow trim for my 70 Dart. Not sure if thats the technical name, but its the chrome trim that meets up with the hood trim. It has to be the deep style, and nice, no pitting please. Shipping to Errington, BC, Canada, postal code V0R 1V0. Thanks.

I need an antenna bezel and nut for a 70 Dart. I don't need the antenna itself. Shipping to Errington, BC, Canada, postal code V0R 1V0. Thanks!

I need a pair of splash shields to fit a 70 Dart. Reasonably priced please, thanks. I'm in Errington, BC, Canada.

I need a drivers side motor mount for my '73 340. The mount from my 318 has the single bolt hole on the bottom side, but the block has it on the top. I'm talking about the actual metal bracket, not the rubber pad.. Anyone?

I need a gas pedal for my 65 Valiant.. Barracudas will be the same. Shipping will be to Errington, BC, Canada. Postal code V0R 1V0.

I only have a few of the correct bolts to mount my scoops to the hood, and need a complete set. I looked on Herbs Parts, who have some for a whopping $70.. Ugh. Anyone know anywhere to get them cheaper, or have any?

Both my J hooks broke, even after using penetrating oil to drop the gas tank. I need 2 of them in good shape, thanks!

I need a good clean set of window trim, front and rear, to fit a 70 Dart 2 door. Mine is in bad shape.

I need a nice pair of interior door handles for my 70 Dart. Anyone?

I'm looking for a pair of dark green bench seat hinge covers for my 70 Dart. These are the plastic pieces which are between the bench and the door which cover the metal bar which allows the seat back to fold forwards. I don't need perfect, just need 2 that aren't broken like mine are. Thanks.

I'm looking for a clean set of wheel well trim for my 1970 Dart, with hardware. Let me know what you have, thanks.

I'm looking for a pair of Doug's Headers to fit my 70 Dart, 340 automatic. I'm hoping to find some for less than 'new' price. Thanks.

I need a V8 emblem for a 65 Valiant. It's thin and wide, compared to one I bought which was thick but skinnier across. Hard to explain, but I've noticed there are 2 styles. I'll get a pin to pin measurement of what I need tomorrow.

My engine builder asked me to try to find a 340 windage tray, since he just sold his last one, and figured if I can find one for a good price, go for it. Anyone?