Search results for query: *

  1. 70DartMike

    Brake Master Cylinder leaking problem.

    Ok, a few months ago I installed front discs from a 75 Dart. I bought a new master cylinder for front discs. The problem I'm having is the seal under the lid of the master leaks like crazy. It drips down onto my inner fender, and as a result I've had to sand all the paint, and primer it to stop...
  2. 70DartMike

    Stupid pad question

    Changing the pads on the single piston caliper discs I have on the car. Stupid question time.. is there an easy way to do this? The piston appears to be out a bit so to put the new pads in I don't have quite enough room to slide everything over the rotor. Do I need to loosen off the bleeder...
  3. 70DartMike

    Brake pedal has no pressure

    So I recently did a disc swap from a 75 Dart (single piston callipers) onto my 70 Dart. The swap went fine, I bled the brakes, but while bleeding them I never really got any pressure in the brake pedal. Ok so today, before starting the car, I pumped the brake pedal about 20 times and then the...
  4. 70DartMike

    Disc brake conversion regarding lower ball joints

    I have a set of single piston discs from a 75 Dart to put on my 70 Dart originally with 10" drums. I pulled the upper control arms, rotors, calipers, brake hoses, and lower ball joints just came with the setup when I pulled it. I was told I could use my original lower ball joints, but that I...
  5. 70DartMike

    Disc brakes.. 2 or 4 piston?

    I have a set of disc brakes from a 75 Dart, big bolt pattern, /6 auto. Anyone know if they are a 2 piston or 4 piston? How do I tell the difference? Or do you guys need pics?
  6. 70DartMike

    Disc brake question

    I'm getting a set of disc brakes from a 74 Dart, which are big bolt pattern. My 70 Dart still has small bolt pattern with front drums. My question is, what parts do I need to pull in order to bolt them into my car? I realize spindles and whatnot, but do I need control arms too? Ball joints? What?
  7. 70DartMike

    Power Brake Booster

    Hello all, could someone please post a picture of the hose and nozzle that go from the power brake booster to somewhere on the engine? Its what gives the booster the compression to be power brakes. Mine is missing, have no idea where it went, and if it does turn up I'll have no idea where it...
  8. 70DartMike

    drum brake distributors

    hey guys this is another question sort of added on to my drum brake thread. does anyone know of either a canadian company, or an american that will for sure ship to canada? websites? i need a pair of 10" rear drums with the 5 on 4 bolt pattern, for an 8.75 rear in a 70 dart. i just need the...
  9. 70DartMike

    drum brakes

    hey guys ok so the question is about rear drums. i just put a 318 904 8.75 combination in my70 dart for now, and the 8.75 didnt have drums on it, but it has the 5 on 4 bolt pattern axles. i was told that i should upgrade to the 10" drum for braking because 9" just isnt really that great for...
Back
Top