Search results for query: *

Does anybody make a pushrod for putting stock 273 rocker arms on a hydraulic cam in a small block? What are you guys that have put adjustable 273 rocker arms and using hydraulic cam using on your engines?

Hi gang, the boys and I are building a 360 and I just got done doing research on piston options for our engine... The problem in picking pistons is that the manufacturers seem to pick some random compression height for the piston, and then give the "piston dome" volume as another +/- number...

I have been noticing some differences in some of my 360 oil pans. Here is one for a truck:

For those of you that are looking for a keyway/woodruff key for the SB camshaft. I picked up some at my local Ace Hardware store. I believe that they are $2.00 each, which is much better than $10 or more some of the parts vendors are asking. Look in the fastener aisle... Woodruff Key 3/16"...

How much impact can changing the heads make on compression??? We're tinkering on the son's 72 Challenger. It's been passed through the family now from my brother, to me, to my brother, and now to my son... It's been in the family since 83 and has just over 99 k original miles on the odometer...

krazykuda submitted a new Article: How to Install a High Press Spring in a SB Oil Pump Read more about this article here...

krazykuda submitted a new Article: How to assemble the front of a small block Read more about this article here...

krazykuda submitted a new Article: How to ID a SB Engine Block: Read more about this article here...

I made a how-to thread on identifying a SB oil pan. Someone has posted and asked what pan they need to run a 360 in an early A-body (specifically a 66 Valiant). Has anybody installed a 360 in a 64-66 a-body and did the standard car 360 pan fit? If not, what did you use? I know from when...

krazykuda submitted a new Article: How to ID a SB Oil Pan 60's - 80's Read more about this article here...

What year 360's have the "thicker bore". I know the 71's were thicker, how long did they make them?

What is the difference between a 3418640 (71-89 360) and the 4027169 (89-92 360) cranks? Are they interchangeable? Can I put the 89-92 crank in an 71-79 360 block without any issues (ie damper etc)? Thanks guys

Hi guys. Putting a 360 together and wondering what is the minimum piston to valve clearance? My cam has over .500 lift and I need to know if I have the proper clearance. We have .250 " intake and .185" exhaust. I think that is good, but I need to know what the minimum is for my own piece...

We have a 71 Valiant with 318. New alternator still does not charge. Noticed an extra blue wire near the field wire connection - how many blue wires come off of the field wire of the alternator 1 or 2. Service manual wiring seems to show one. Can you guys check yours and let me know if you...