Search results for query: *

  1. SRT_DSTRHOLC

    Roll Bar Harness Belt Tabs

    I was wondering if you guys have pictures or know of some websites that show how seat belt tabs for 5 point harness belts should be welded aka location and direction the tab faces. Thank You!
  2. SRT_DSTRHOLC

    Sagging polyurethane mounts?

    I'm having an issue with the engine sitting to low. I can pull the engine all the way up, tighten bolts, but when I let the engine down I can see, specifically the passenger side sag back down to same spot. These are about a year old and the energy suspension brand. Would I be better if I got...
  3. SRT_DSTRHOLC

    Stock v8 leaf spring arch

    Does anyone happen to know how much arch is in a stock leaf? I need a tangable number so I can order some new monos. If you have a pair and can measure for me, that would be great! Straight edge from front eye to rear eye and then from top of leaf to straight edge. Thank you!
  4. SRT_DSTRHOLC

    Spring slider mounting

    I am doing my rear next week and I would like to find out the best way to center up the spring sliders on the rear from anyone who has experience! Thank you
  5. SRT_DSTRHOLC

    Width of Dart frame rails and Duster Rails

    Hey guys, I will be swapping in a rear from a dart that had the springs moved in, I wanted to know if there is more than a 90 % chance that when I relocate my springs, that it will bolt in, aka that the frame rails are same distance apart. Thanks!
  6. SRT_DSTRHOLC

    Full tub or Mini tub to achieve ride height goal

    I Will be cutting the rear up and doing the same to the wheel wells. The question is: I will be running 18x10.5 or wider wheels on a 28 in tall tire. IF I mini tub, how low can I go in the rear? I would like to get the look of the demon below or a tad lower, but I don't know personally if a...
  7. SRT_DSTRHOLC

    Spring Relocation without mini tub...

    Has anyone done the 3in inboard spring kit without mini tub? I want to get some more space for a 315/60/15 tire which is Tire Diameter:30.00 in. Section Width:12.90 in. Tread Width:11.90 in. I want to also be able to lower the rear so that the lip of the wheel well covers part of the tire...
  8. SRT_DSTRHOLC

    Rear Suspension help. (tri. 4-link or Springs).

    Hey guys, Im currently building the car and all that is really left is paint and then it is time to put it back together. The question I had was that this car will be mostly a street car, but I will race it at the track when possible. I want to get everything out of the car as it will be a 410...
  9. SRT_DSTRHOLC

    Front Spring Hanger boxes

    :prayer:Anyone know where I can get these? They are exactly like the ones used in the spring relocation hit. I cant seem to find them anywhere.:prayer:
  10. SRT_DSTRHOLC

    Welding a 8 point Roll Cage

    Is there someone special I need to see or go to have my cage welded in? I want it to be NHRA legal so when I go to the track they don't say I can't run. What did you guys with cages do? Thanks!
  11. SRT_DSTRHOLC

    Pitman arm search!

    I dont remember what car I got my manual Steering box out of for the duster. What cars have pitman arms that will work with my 73 and up steering box/ suspension
  12. SRT_DSTRHOLC

    Which model or part #s for wheel bearings etc

    I need new wheel bearings, idler arm, pitman arm, wheel bearing seals etc and was wondering if there is a specific size or something. I know the idler arms most will say moog, but maybe theres a cheaper place to get them
  13. SRT_DSTRHOLC

    Pst

    How would PST honor the lifetime warranty without a receipt? :(
  14. SRT_DSTRHOLC

    Pst kit missing some parts

    So I just got the PST poly basic kit. IT is missing some parts compared to the Super kit... These are the parts missing: * 2 Inner Tie Rod Ends * 1 Idler Arm * 2 Tie Rod Adjusting Sleeves * 4 Upper Cam and Bolt Kits What brand should I get and if I get raybestos should I get the...
  15. SRT_DSTRHOLC

    trans and motor mounts

    Anyone know where I can get a Poly trans mount, poly motor mounts or inserts and solid mounts for a 73-74 duster? spool mounts
  16. SRT_DSTRHOLC

    Motor and trans mounts

    Would it be too much to run a Solid Drivers mount, Poly passenger mount and poly trans mount? Meaning would anything break? I dont care about vibration
  17. SRT_DSTRHOLC

    De-arcing SS springs

    How much room would I need to have for 275/60/15 on the street aka 28in tire and 28 Hooiser slicks on the track? I want to de arch the springs to even out the ride a little
  18. SRT_DSTRHOLC

    Rebuilding 73 duster front end

    I wanted to know how I should go about this. Im looking to replace my converter and headers also, so i wanted to know if I should remove the engine and transmission, so I can remove the entire K frame or just Jack the car up and replace the headers then the front end and then the TQ..Keep in...
  19. SRT_DSTRHOLC

    What is the PSC kit missing?

    What is the PSC kit missing compared to the Super PST kit? Pst containts: Most Super Kits Contain: * 2 Upper Ball Joints * 2 Lower Ball Joints * 2 Strut Rod Bushings * 2 Outer Tie Rod Ends * 2 Stabilizer Links (Bolt and sleeve type links only) * 2 Inner Tie Rod Ends * 1 Idler Arm * 4...
  20. SRT_DSTRHOLC

    wheel/tire hop

    took the car out for a spin to show my friend the motor. When I went to floor it in first it seemed like the back end was hopping while spinning the tires. Is there a way to fix this? I have SS springs and frame connectors with a pinion snubber.
  21. SRT_DSTRHOLC

    steering box loose

    Does anyone know how I can get in there and tighten the two bolts on the side of the steering box without it being a pain in the ***?
  22. SRT_DSTRHOLC

    Getting all

    of the power to the ground...What are little things that can be done to get all the horsepower out of your car possible and not losing it in the drive train? not big expensive mods but things like synthetic oils and solid mounts and stuff like that
  23. SRT_DSTRHOLC

    Track and Street Suspension

    What is a good way to setup every piece of suspension for my duster? Its a 360 with 318 torsion bars. Front disc. The rear has SS springs and a Snubber. And mopar Racing shocks What else should I do to make my car get all the traction it needs on the track? Solid motor mounts? adjustable shocks...
  24. SRT_DSTRHOLC

    solid drivers mount?

    What would the benefit be to using a solid drivers mount and a rubber pass. with a poly trans mount?
  25. SRT_DSTRHOLC

    who?

    has the home made caltracs on their car? I know there is a how to and was going to ask how much to make me a pair
  26. SRT_DSTRHOLC

    Torsion bar backing out??

    I tried to raise my torsion bar on the drivers side, but it lowered back down. Is there anyhting that would casue it to back out? It still has the clip at the back of it and the nut turns also
  27. SRT_DSTRHOLC

    Torsion bar problems

    OK, I tried to Raise my Drivers side Torsion bar and it did raise, but then it lowered back down BY ITS SELF!?!?!??! WTH I have no clue what happen, also the Nut on the Pass. Side was lose...Are these bad signs?
  28. SRT_DSTRHOLC

    Lowering the rear

    I want to lower the rear of the duster, but im not sure if the springs will hit after i lower it.. is there any suggestions? Can i put the spings back to normal after i lower them if they hit?
  29. SRT_DSTRHOLC

    torsion bars

    How can i tell if mine are bad? My drivers side bolt wont tighten and its lower than the pass. side
  30. SRT_DSTRHOLC

    tires rubbing

    Ok some of you have heard about my little problem with my SS springs and tires. I have decided to either go Offset hangers and shackles or a small spacer like 7/32 or 5/16. If i go with a 7/32 will it be a good size difference or will i need alot of room?
Back
Top