Search results for query: *

Hey guys, need some help. I'm having a hard time finding all the correct trim to fill the trim holes on my dart and I was thinking of just filling the holes, but wanted to know what the best way to go about this would be? I was told if I welded them, that I am going to have to skim the entire...

Does anyone sell one or just custom make one?

Okay so im doing the first round of blocking and there are not many low spots, but what should I do to fix them? I have a gallon of evercoat liteweight filler, can use this over primer or should I use glaze? Also in the engine compaterment there are areas that were filled but we did a shitty job...

What do you guys suggest to do? I will be changing colors and the wheel wells in some areas show the original color and the rest is under coating, would you strip to bare metal, etch prime and bed liner? Or would you grind down etch prime spray black? (possibly 3M under coating).

What temp., should the garage be? The weather looks to be in the low to mid 60's. I have a small heater I was planning on trying to heat the garage with to keep the temp around 60-70 minimum, but wanted to see what you guys suggest. I would of course be using a fast reducer. And the paint does...

1. Can I use spot putty or should I use filler and what kind? 2. These spots would be the dimples on the fenders of the duster, not holes where things can go through, just dimples and the others are holes that were welded up, but need filler or spot putty. Thanks Also there was some...

On the left Thanks for the info Adam..Decided to reuse thread instead of making a new one.

We are using the original paint as a base. We had taken the car to get work done on it and the guy took a majority of the dents out and spot primered where he worked. He did not sand the rest of the car. I want to know what sand paper I should start with before I start messing with filler if I...

When you mini tub a duster. Do you just drill out the spot welds on the trunk supports that are welded on to the wheel well bend up and re weld when done? Or do you make new ones? And what do most do for back seat fitment? I have a fold down rear seat.

Im ordering PPG 2021, but I need a little help with the quantities. How much reducer and what type should I purchase? Warm or MED? And How much Hardener? Thank you. I found this about the reducers "DT885 can be used from 70 degrees - 85 degrees DT870 is used for 65 degrees to 75 Degrees and...

Okay guys bodywork is done!....It's time to primer the car. The car was sanded down and not taken to bare metal. What kind of primer and what brands are some good ones to use? Im looking at something in the 150 dollar range for a gallon of primer and catalyst. Thanks guys ps looking for a...

Does anyone know a car cover that will cover my duster with a six pack scoop? Looking for one that will fit nicely, not scratch the paint and water proof would be great, but not mandatory. Not looking to spend more than 100-130.

When you first take the lead off to put the new one on and then finally get the new one on, how do you prefer to fill the seams? Use new lead or what? I have never worked with lead, so I would not know what to do. Any help would be great.:prayer:

I think I am going to end up being safe then sorry. I wanted to know if you guys could help me understand what I would need to prepare the car for paint. The car has the original paint and no visible rust, so I wanted to sand the car down to a point where it is a good base for primer and then...

I have this grill, but no bezels. Are the duster ones the same as the 69 valiant ones? aka like the two in the picture below. Please let me know!

Hey guys, Im going to be getting a new fiberglass lift off hood, but it will be a 70/72 hood because I am changing the grill. I was wondering what do you guys think looks good on a Duster. Only thing Im worried about with the Hemi hood is that it seems like it will flap around a lot. What do you...

Does anyone know how i can put the Duster on Rollers, so I can move it around, but take the rear end and front end off? Ive seen it done before, but I do not have the mechanical ability to do it myself. Any help would be awesome. I believe they are called...

I wanted to get the PPG DCU2021 and I mean I can order it and I found a place in CA that sells it, but Im not sure if my painter will use it. So Im wondering if you guys can find me a clear as good and near the same price range. Please and Thank You

Okay guys its getting closer to paint and I want to know what supplies I will need. Meaning what types of primer, clear and paint. The duster has original paint still and I plan on it being sanded down, but don't belive it will be down to bare metal. If its just sanded is only epoxy primer...

What is needed to make this grill work? Or Can I just bolt it right up? I will NOT get a different hood.

I'm trying to figure if its worth it for me to think about spending 800-1200 dollars to strip my car completely and have it blasted and primered. That would mean all new window gaskets (Winshield being the hardest and most expensive to find) taking the K member and rear end out and that much...

Any good suggestions when doing this? Only Holes Im leaving are holes for washers and steering wheel and for wiring. Im even getting rid of the cowl.

Hey guys after striping the carpet and dash out of the car, I see there is some surface rust, very little and not horrible at all. I wanted to know if I sand it down some, spray with the converter and then go over with the encapsulator and then paint it will this be good? I know not better then...

ITs getting closer to paint time and Im having trouble picking a paint. The car the original yellow or w.e color interior and I dont like it. So I plan on painting it all black or something. The trouble is the dash, If I dont remove the windshield to paint it, then Im going to have to try and do...

Im getting closer and closer to paint the car but Im trying to figure out what color....The original JY3 Honey gold or the New Plum crazy purple from the new Challengers! Here are two pictures...also the one in my sig is my car and is the original paint. Keep in mind, if I go purple, I...

how did you guys fill things like the Ac hose hole and the AC blower hole. I want to fill those and all the little pin holes I dont need before I paint, but after I strip it and rather use a welder than fill the holes with bondo and My last resort to fill the big holes is fiber glass but that...

Anyone know if there are places that will put the color I need aka JY3 into spray cans mixed with clear already, so all I need to do is the stripping, prepping and priming?

Will a 71 Duster fiberglass Front bumper work on a later model Duster if I use stock Brackets or buy the fiberglass ones?

Whats needed to fit a 71 duster metal or fiberglass bumper on my later model duster? front and back

What is a good guess of how much the windows of a 74 duster weight.. Meaning drivers and pass side door and the mini back windows.. Im thinking about lexan thats scratch proof..Since its stronger and safer