Search results for query: *

Does anyone make hoses for the early A-body V8's that are like the originals with the proper bends and angles for a car without A/C. The Gates upper hose they have listed that you have to cut to length just doesn't fit right. It's too straight and will kink slightly to make the offset needed...

Does anyone know if the cardboard cover for the tail panel is being reproduced? This is a panel that goes on the inside of the trunk on the rear panel and covers all the way across from taillight to taillight. I have the plastic latch cover in good shape, but, that cardboard panel is getting...

I'm looking for a good source to get some new heater hoses for my '66 A-body small block without A/C. I'd like to get ones with all the proper ridges, logos, part numbers, date codes, etc. and hopefully Made in USA. I don't need any fittings, straps, or clamps. Any recommendations?

I'm looking for some clips that attach a molding onto the cowl of my '66 Valiant convertible. As you see in the photo, they're 5/8" X 5/8", have a foam seal, and the bent prongs that extend into the hole in the cowl are 3/8" long. I'd like to find 7 new ones if someone knows a source. I can live...

Anyone have one factory brake drum spring for a 10" drum? This is the spring that wraps around the outside of the drum and sits in a groove in a factory drum. I used to have so many of those things, but, can't seem to find one at the moment. Price shipped to 92120.

Looking for a good 273 crankshaft. Prefer locally as I would rather pick it up than have it shipped.

I'm looking for the plastic convertible top drain funnels for a '66 Valiant. They should be the same for '63-6. They're mounted in the quarter panels by where the top frame is bolted to the body. Thin plastic, so, they're probably fragile. Take care when removing them if you have a parts car...

Anyone know of a good source of the material they use to make the spare tire covers? This is for a '66 Valiant. If someone here in the San Diego area has a good one for sale, I'd be interested in that, but, I can make my own if I can find fiberboard like the original. I would also like to get...

I'm looking for some molding clips that go on a '66 Valiant Signet convertible lower windshield molding. It's the one that snaps onto the cowl. The part number is 6001542. Either new or good used is fine. Thanks.

Anyone have a decent set or just some good bezels? I'm doing a restoration and would like pretty nice ones. I can rechrome the bezels, but, it's a bit harder to do the actual ash trays. What have you got? Thanks.

Anyone have any factory rear bumper guards for a 1966 Valiant or Barracuda. Looking for as nice as I can find. I mainly need a nice left one, but, I'll take a pair or a right that's nicer than the one I have. Thanks.

As far as I can determine, this is a '66 A-body 273 4bbl. only bell crank for the kickdown linkage. I need another one just like the one in this photo. Not a 2bbl. one or a '65 4bbl. one. If you have one for sale, please PM me. Thanks.

Anyone have a couple of stock strut rod washers for a '66 A-body? Should be the same '63-6? I don't know if the newer ones are exactly the same or not, but they use the same part number through at least 1971. I'm doing a stock restoration with the original type bushings is why I want them, or...

I'm still looking for a nice hood for a 1966 Valiant or Barracuda. Thanks, Mark

I'm looking for some original license plate frames from Universal Motor Company LTD, of Honolulu Hawaii. Prefer nice originals from the mid 60's of course, but, I will take pitted and/or broken ones too, so, I have something to go by to make a reproduction. Even a good photo of one would help...

Anyone have a nice '66 Valiant or Barracuda hood? Hopefully in the southwest somewhere :lol:

I'm looking for just the 4bbl plate with bellcrank for a 1965 and 1966 Commando/Charger 273. It's the part bolted to the back of the driver's side cylinder head. I have all the other linkage parts, but, somehow that plate got away. If you only have it with all the other linkage parts, I may be...

I'm still looking for a good restorable convertible top frame (or pieces) for my 1966 Valiant. I mostly just need the front header and the rear-most bow assembly, but, I'll take a whole assembly if needed. I could also use some unbroken interior rear seat side panels for the same car. I believe...

I'm looking to get some nice rear interior panels and the front upper header section of the convertible top. Maybe a whole top mechanism? I need a rear bow assembly too. Please PM me with descriptions, photos, price delivered to 92120. Thanks.

Anyone have a nice trunk lid "V" emblem from some models of 1965 Valiant and most 1966 models? The part number is 2526268. I know, I can get a new repro one, but, I'd rather have a nice used one if it's reasonably priced. Thanks.

Hi all, I'm looking to find some mid 60's vintage license plate frames from Universal Motors in Honolulu, Hawaii. Any condition considered but naturally I'd like some nice ones as long as I don't need a loan to buy them! Thanks, Mark

I'm looking for a '72-8 Dodge pickup, van , Ramchanger, Plymouth Trailduster, etc. 4 speed manual bell housing for a big block. Thanks, Mark

Anyone have a good manual steering gear for a '79-87 Dodge truck 2wd or know someone who does? Price delivered to 91977 in SoCal. Thanks, Mark

I need a back glass for a '62 Plymouth Valiant. The interchange is '60-2 Valiant and '61-2 Dodge Lancer. Don't care if it's clear or tint. It's the same for all body styles except the station wagon. Shipped to 91977 or possible southwest pickup. Thanks, Mark

I need a factory RH exhaust manifold for a '59-60 Dodge pickup with a 318 poly engine. The casting number is 1945094 and has the generator mounting bosses on it. If the heat riser is stuck or missing, I can deal with that. Just need a crack free manifold. Thanks, Mark

There are many Dodge Darts for sale on this weeks Craig's list. Go to craigslist.com and click on the San Diego section. Looks like some bargains to be had if you want a builder.

Anyone have one that they can ship to San Diego? Might be able to pick up if it's not too far away. Thanks, Mark

If anyone has a good early 225 engine they want to sell, Boulevard Auto Parts in Springfield Massechusetts is looking for one. 888-844-2583

Clear or tint would be fine. SoCal pickup or delivered to 91977. Anyone have an extra one they can price me? Thanks, Mark