[SOLD] .030 standard rebuild kit

Mopar Mechanical Parts For Sale

Thread Status:
Not open for further replies.
  1. memike

    memike Super Moderator Staff Member FABO Gold Member

    Messages:
    50,637
    Likes Received:
    17777
    Joined:
    Jan 8, 2006
    Location:
    on the hill
    Local Time:
    8:43 PM
    Contact Seller
    Here before E-Bag :D
    complete with rings, lifters, pistons and oil pump and gaskets.
    Standard Cam, no timing chain or gears ](*,)

    Everything you see $130 should be a more then far price for our members here plus the ride :toothy9:

    Pay pal or money order workd for me :hello2:
    If anyone is looking to rebuild a 318 and go .030 over this is a good deal.

    Thank you fabo, Looking to go to Indy and selling a few things :cheers:
     

    Attached Files:

  2. Snake

    Snake Mopar Nut

    Messages:
    9,325
    Likes Received:
    319
    Joined:
    May 22, 2006
    Location:
    Belleville Canada
    Local Time:
    8:43 PM
    Thats a very good deal good luck with the sale.
     
  3. CUDACOX

    CUDACOX Well-Known Member

    Messages:
    4,118
    Likes Received:
    104
    Joined:
    Jun 28, 2009
    Location:
    Innisfil, Ontario, Canada
    Local Time:
    8:43 PM
    P.M. Sent
     
  4. memike

    memike Super Moderator Staff Member FABO Gold Member

    Messages:
    50,637
    Likes Received:
    17777
    Joined:
    Jan 8, 2006
    Location:
    on the hill
    Local Time:
    8:43 PM
    Pm returned I will take a couple more pictures real quick this morning for everyone
     
  5. memike

    memike Super Moderator Staff Member FABO Gold Member

    Messages:
    50,637
    Likes Received:
    17777
    Joined:
    Jan 8, 2006
    Location:
    on the hill
    Local Time:
    8:43 PM
    I am sure all these need is soaked and cleaned to be installed, looks like some very small amount of moisture found it's way to the small lifter boxes.
    Here is a beter picture of the complete gasket kit.
     

    Attached Files:

  6. TheWolfman

    TheWolfman Well-Known Member

    Messages:
    51
    Likes Received:
    2
    Joined:
    Jan 15, 2011
    Location:
    orland park il
    Local Time:
    8:43 PM
    what are the cam specs?
     
  7. memike

    memike Super Moderator Staff Member FABO Gold Member

    Messages:
    50,637
    Likes Received:
    17777
    Joined:
    Jan 8, 2006
    Location:
    on the hill
    Local Time:
    8:43 PM
    Here you go theWolfman and welcome to this great site if I missed you in the welcome wagon thread :hello2:
     

    Attached Files:

  8. TheWolfman

    TheWolfman Well-Known Member

    Messages:
    51
    Likes Received:
    2
    Joined:
    Jan 15, 2011
    Location:
    orland park il
    Local Time:
    8:43 PM

    okay i feel like an idiot, completely glanced past that haha
     
  9. krazykuda

    krazykuda Well-Known Member FABO Gold Member How-To Section Editor

    Messages:
    62,144
    Likes Received:
    28979
    Joined:
    Aug 20, 2007
    Location:
    Orland Park, IL
    Local Time:
    8:43 PM
    I believe (from old memory) the old 318 stock cams are 248 duration and .399 lift. if this is the stock one. There were a couple of different grinds for the 318. One only had 240 duration.

    Hello wolfman, we got to get together sometime...

    Great deal memike, I don't have a 030 over 318 or I'd buy it...
     
  10. TheWolfman

    TheWolfman Well-Known Member

    Messages:
    51
    Likes Received:
    2
    Joined:
    Jan 15, 2011
    Location:
    orland park il
    Local Time:
    8:43 PM
    yes we do, at the moment im scroungin pennies to finish my car haha
     
  11. memike

    memike Super Moderator Staff Member FABO Gold Member

    Messages:
    50,637
    Likes Received:
    17777
    Joined:
    Jan 8, 2006
    Location:
    on the hill
    Local Time:
    8:43 PM
    Thank you krazykuda

    I will consider trades, I do need an Eddy 600 for my ramcharger and or a nice breather and valve cover set But would rather sell..


    I will lower my price $110 plus shipping, heck the pistons alone are well worth that for some one building a 318. and the gasket set and oil pump will go a long way on any small block build I believe .
    I will be shinning and organizing this kit up for nicer pictures and put this kit on e-bag Saturday :hello2:

    Thank you fabo :D
    Opp's :banghead: Looks like I jumped the gun and did not wait on my 3rd day to change my original first post.
     
  12. krazykuda

    krazykuda Well-Known Member FABO Gold Member How-To Section Editor

    Messages:
    62,144
    Likes Received:
    28979
    Joined:
    Aug 20, 2007
    Location:
    Orland Park, IL
    Local Time:
    8:43 PM
    From the melling site, the cam is the 75-84 cam. I don't have time to look up right now, but will try to find my 75 service manual later.
     
  13. TheWolfman

    TheWolfman Well-Known Member

    Messages:
    51
    Likes Received:
    2
    Joined:
    Jan 15, 2011
    Location:
    orland park il
    Local Time:
    8:43 PM
    i have a carter 600cfm carb and a stock valve cover set with the oil fill/breather are you interested in that for a trade?

    i've been eyeing this because its a great deal i just don't have the cash or especially the extra dough afterwards to get the block bored out
     
  14. krazykuda

    krazykuda Well-Known Member FABO Gold Member How-To Section Editor

    Messages:
    62,144
    Likes Received:
    28979
    Joined:
    Aug 20, 2007
    Location:
    Orland Park, IL
    Local Time:
    8:43 PM
    OK. From the 75 Mopar Service Manual the stock 318 cam is:

    240/248 dur
    26° overlap
    .373/.400 lift
     
  15. 64 SRT8 Dart

    64 SRT8 Dart Well-Known Member

    Messages:
    2,340
    Likes Received:
    97
    Joined:
    Dec 1, 2010
    Location:
    Colorado Springs,Colorado
    Local Time:
    7:43 PM
    PM Sent.
     
    • Like Like x 1
    • memike

      memike Super Moderator Staff Member FABO Gold Member

      Messages:
      50,637
      Likes Received:
      17777
      Joined:
      Jan 8, 2006
      Location:
      on the hill
      Local Time:
      8:43 PM
      I would rather sell and I was looking for aluminum VC's, I have 2 sets of stock VC Wolfman, and on the carb I was hopping on a newer Eddy 600.
      Thank you for your time and I have a buyer that has cash that I need worse then anything at this time. Have you posted in the parts needed thread :coffee2: There could be a member that has what you ar looking for and would or could do a trade with you on something


      I got your pm :hello2: and a good tech could answer your questions
      But I woke up this morning and I have a member that wants this kit.
      One thing I have learned here is if I need a part there are many members that keep an eye on the parts need thread 64 SRT8 Dart :cheers:
      It has help me find parts quickly.
       
    • memike

      memike Super Moderator Staff Member FABO Gold Member

      Messages:
      50,637
      Likes Received:
      17777
      Joined:
      Jan 8, 2006
      Location:
      on the hill
      Local Time:
      8:43 PM
      No Biggie.
       
    • memike

      memike Super Moderator Staff Member FABO Gold Member

      Messages:
      50,637
      Likes Received:
      17777
      Joined:
      Jan 8, 2006
      Location:
      on the hill
      Local Time:
      8:43 PM
      voodoo1 will not reply after he said he what's this kit.... No Biggie..
       
    • memike

      memike Super Moderator Staff Member FABO Gold Member

      Messages:
      50,637
      Likes Received:
      17777
      Joined:
      Jan 8, 2006
      Location:
      on the hill
      Local Time:
      8:43 PM
      Thank you 64 SRT8 Dart, Pm and shipping cost sent.

      SOLD, to the prompt member here, Thank you 64 SRT8 Dart. :hello2:
       
    • memike

      memike Super Moderator Staff Member FABO Gold Member

      Messages:
      50,637
      Likes Received:
      17777
      Joined:
      Jan 8, 2006
      Location:
      on the hill
      Local Time:
      8:43 PM
      Fallow up post for 64 SRT8 Dart, Yes I think when buiness is being dun this is the way to follow up....
       

      Attached Files:

    • memike

      memike Super Moderator Staff Member FABO Gold Member

      Messages:
      50,637
      Likes Received:
      17777
      Joined:
      Jan 8, 2006
      Location:
      on the hill
      Local Time:
      8:43 PM
      I do this to everything I sell to show packing and it makes the customer happy :cheers: keeping them updated is fun and we all learn from it :D This is sold and I need to mark it as sold, I need to learn how to do that now
       
    Thread Status:
    Not open for further replies.
    1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
      By continuing to use this site, you are consenting to our use of cookies.