[Found!] 10.5 X 29.5 X 15" slicks

-
Status
Not open for further replies.

SSing

Well-Known Member
Joined
Feb 24, 2012
Messages
1,097
Reaction score
333
Location
upland, sweden
Rating - 100%
3   0   0
Contact seller
For mock-up but jet good enough so I can do some short busts on the strip.
Old slicks might be just fine here...
As always since shipping (from FL) later is forwarded to Sweden, I hope to find something in the SE area, to save some on postage.
Thank you
wheel.jpg
 
I believe i have some here in Florida. I will take a look today
 
Sorry i have a couple sets smaller and sets way to large.
 
Unless you are getting them for next to free... Why not just order new and resell them when you are done with your project? Shipping has to cost a lot.
 
Unless you are getting them for next to free... Why not just order new and resell them when you are done with your project? Shipping has to cost a lot.

yes, but I want to be sure of what size diameter fits. I want them as tall as I possibly can have them. I´m talking 1/4-1/2 of an inch here more or less...
 
I have a set of 29.5x10.5x15 MTs I replaced this week.
Bought them new Oct 2015
They have 154 passes on them will probably go another 150.
One of them has some scuffing on the sidewall when it rubbed the quarter lip when I first installed them.
$75 in the Orlando Fl. area if you can get someone to pick them up.
I have no time for shipping them.
 
I have a set of 29.5x10.5x15 MTs I replaced this week.
Bought them new Oct 2015
They have 154 passes on them will probably go another 150.
One of them has some scuffing on the sidewall when it rubbed the quarter lip when I first installed them.
$75 in the Orlando Fl. area if you can get someone to pick them up.
I have no time for shipping them.

Thank you. Sounds good.
I have to check with the guys in Mount Dora. Hopefully they can help me.
What car, if I may ask...
 
I have a set of 29.5x10.5x15 MTs I replaced this week.
Bought them new Oct 2015
They have 154 passes on them will probably go another 150.
One of them has some scuffing on the sidewall when it rubbed the quarter lip when I first installed them.
$75 in the Orlando Fl. area if you can get someone to pick them up.
I have no time for shipping them.

How far from Mount Dora btw.
This is just center and north of the Dora Lake.
 
They were on a 67 Coronet.
I'm about 20 minutes from Mount Dora.

Thank you.
As soon as I have this arranged, I´ll pay you and send them you phone # if this is alright with you.
I get back to you when I know everything is ok with this company is ok
Thank you
Stefan
 
Last edited:
Status
Not open for further replies.
-
Back
Top