[WANTED] 1967 barracuda dash frame

[fireguyfire]

I’m looking for a steel dash frame for my 1967 barracuda. My car is a survivor and the mice had gotten into it during its 30 sleep and a mouse nest in the drivers side bottom corner of the dash rotted a big hole through it.
I’m in western Canada and if someone has an extra dash frame laying around, let me know.

 

[4spdragtop]

Have u tried Nigel @National Moparts here in Onterrible?
Also @70DartMike is in BC, @gdrill is in AB. @oldkimmer is in Sask.
Good luck

 

[oldkimmer]

Sorry I don’t have one. Just a 70 duster one. Kim

 

[gdrill]

Where you to in Alberta?

 

[fireguyfire]

Where you to in Alberta?

Just outside of Calgary

 

[gdrill]

OK, I may have a 68 rallye frame but I have a 67 standard frame you could cut a section out of to repair yours depending how bad it is.

 

[Deweywinger&howe]

I assume freight from fly over country is prohibitive
Tim in Iowa

 

[fireguyfire]

Yes, mine is a rallye dash with the performance gauge in the middle.
It’s a formula S fastback

 

[gdrill]

Sorry the 68 had knee knocker pads. The 67 is a standard dash but these pics show what you already know. Very subtle differences easily modified. You can see the difference in the radio mounting. Standard and rallye have the same basic opening. Just the radio is different.

67 standard

68 rallye

 

[gdrill]

I’m in Lethbridge, I could convert it. I should have already!

 

[barracudakid]

I have a 67 frame
I ship worldwide

 

[grampscamp]

I have a 67 Dart frame that would work with some slight modification. I'm in Vancouver.

 

[70DartMike]

I may have one more Barracuda dash, I'm on Vancouver Island. I mostly have a pile of 70s A body dashes now

 

[fireguyfire]

Thanks for the reply’s fellas. I’m exploring my options and I’ll be in contact with you that offered up options.