1968 318 Cuda Idle return spring recommendation

[Traxfish]

I need an idle return spring for a 1968 Barracuda with the Carter BBD 2 bbl on a 318 V8. Any recommendations on where to get one?

I had been using an off the shelf universal spring but it's loosened enough to where it won't fully shut the throttle when I gently take my foot off the gas and that's a hazard. For now I just slapped on 2 springs so it shuts but that's not a long term solution.

 

[moparmat2000]

Should be a spring inside a spring dual redundancy setup.

 

[4spdragtop]

Always 2 springs in case of one failing. I would go to parts store buy generic. You can cut the "tails" down and bend them.

 

[Dana67Dart]

If you want oe

Go on ebay and Google this number, it is for 67 2bbl but it interchanges to other parts as well

2946637

 

[Willyrd]

Just use whatever the hell they have at Ace Hardware