[FOR SALE] 1968 Barracuda roller

-
Status
Not open for further replies.

68cuda408

FABO Gold Member
FABO Gold Member
Joined
Jun 4, 2013
Messages
642
Reaction score
344
Location
11967 NY
Rating - 100%
10   0   0
Contact seller
Throwing this out there while the engine is out. This is a done car that weighs 2950# with 1500 even on the nose. Car was finished last summer and has 1600 miles (drives anywhere).Solid AZ body fresh Chromabase paint. VFN glass tilt/lift off nose with stock grills. Jeep headlight buckets and painted surrounds. VFN lift off hood with VFN scoop (hemi b body).Mix of custom and stock new interior . RMD dash with gps speed hut gauges and pioneer deck with BT media and hands free phone. Tilt steering , B&M stealth shifter in custom console. All new harnesses and fuse box.
Control freak triangulated 4 bar rear,4" narrowed8-3/4 ,Moser axles with 3:91's. "front halved" in the 70's with 2x3 rails and a factory k-frame, now nose barred with an HDK set up with manual rack. Viking D/A coilovers all around. Wilwoods all around with all new plumbing. Be cool radiator with dual contour fans (controlled by EFI ECM).Was a stick car now auto with cooler. Setup for LA/727(with HDK any engine can be installed) with FAST XFI and custom cell. Billet Specialties street lites.325 50 15's m/t streets and minitubs. Asking $28000 as a roller with computer, without engine and trans. Though I guess all can be negotiated PM for more info.Thanks located on Long Island in NY 11967

883-01-01 - Copy.jpeg


887-02 - Copy.jpeg


889-01-01.jpeg


892-01 - Copy.jpeg


893-01 - Copy.jpeg


20170524_173558 - Copy.jpg


20170524_174153 - Copy.jpg
 
Last edited:
Thanks for the likes. The engine hasn't come back yet,so the cars still here.
 
I should be getting my engine back from the machine shop this week. Weather and temps permitting, Assembled, painted and reinstalled soon.....If anyone is interested after that I'm asking $38k with a roller 408 ,ported and port matched Eddy top end with super victor EFI intake (Muscle Motors).New Comp roller cam (same spec as the one removed),pushrods, rockers, shafts and spacers. Hughes roller lifters, B3 geometry kit, Scat bottom end (Merkel Racing engines).Milodon pan and pickup, Melling pump, Flow cool water pump,TTI 1 7/8" with "mufflers", Hughes 3500 converter and Freddy Brown (FB racing) 727 with full reverse manual and Denny's shaft.GM 105a charging system. Car ran 11.3 and 11.4 first time out with no adjustments at E-town last summer.Pics and video available . Keith

884-01.jpeg
 
Back together and runs great. Will consider trades for a late model challenger of equal value.
 
Now runs 11.2's at 121 mph ,last Monday at Musclepalooza at Lebanon Valley. It also took an award for best paint.
 
Status
Not open for further replies.
-
Back
Top