Does anyone have any specific dimensions on where the Rev lamp hole goes in the dash of later model A-body? Looking for OEM dimensions. Pics of an E-body location attached to show what I'm looking for specifically. Thanks in advance for any help.
1970-6 A-body Rev light indicator location
- Thread starter Dan Brewer
- Start date
-
OneOfMany
Well-Known Member
70 dart 4spd. Dash still in car
Left edge of dash (not the raised seam) to center - 4-1/2"
Lip of dash as shown in blue to center - 3"
Hole - 1"
Edited to put 1/2" on correct measurement duh.
Left edge of dash (not the raised seam) to center - 4-1/2"
Lip of dash as shown in blue to center - 3"
Hole - 1"
Edited to put 1/2" on correct measurement duh.
Just to confirm your measurements?
Appreciate the help, thanks.
Appreciate the help, thanks.
I think different years are in different spots. But I think you can’t go wrong with the above spot
Last edited:
If anyone else has pictures / dimensions of other years, It would probably be helpful for others in the future to post them up in this thread.
I have a few I can post. Next weekend. Sorry unable to get to them now.
69 Dart
68 Barracuda
70 Duster
I believe I also have a 71 Duster.
69 Dart
68 Barracuda
70 Duster
I believe I also have a 71 Duster.
Not sure if Steve will see this thread, so I'll post his picture that I saved. I have to drill a '71 Duster dash and will use his dimensions.
OneOfMany
Well-Known Member
Correct as per mine. 1970.
-
