[SOLD] 1970 dart swinger

[rbkt65]

parting out a 70 swinger. parts that i am keeping are as follows: v8 k-member, front seat, front bumper, rear valance. chrome around the frt/back glass and down the side already sold. what do you need? shipping big items will be an expensive cluster. depending on price i ask/get, might meet somewhere. lots of smaller things. it was an a/c car. very little left of a/c. car has 10 inch brakes. also have the spindles, drums, upper control arms from another 10 inch brake dart, along with this one. hood and trunk lid are junk and the spare tire well also. i would consider cutting the quarters off and possibly the frame rails if the rails are good. SEE MY LAST POST FOR WHAT IS STILL LEFT.

 

[4spdragtop]

Rick if the rears are 10" drums(no repops anywhere) I would be interested but shipping will be stupid.
GLWS

 

[BigStrok3]

How is the quarter glass on both sides? Do you know if it is tinted or not? Also is the chrome attached to the front edge of the quarter glass in good condition?

 

[rbkt65]

i will go look and take pics for you now. be a few minutes

 

[rbkt65]

the glass is not tinted. the chrome appears to be good but the rubber seals that attach to the chrome is ripped. here are 6 pics. some of the pics are of the upper half and then lower half of the chrome from the outside.

 

[BigStrok3]

I need to see if mine are tinted or not. If I can't use the glass would you be willing to separate the chrome trim and if so how much? If the glass is the same as mine and not scratched up I'd be interested in the whole glass and trim on both sides. What would you want for them? I'm in Wood River and can pick up.

 

[Jim Ward]

How are the core support side braces?

 

[rbkt65]

ok i think. i will get you a pic in the day light tomorrow, if that is ok. it is already darkthirty here in illinois.

 

[Jim Ward]

Yes sir. Here too in Michigan. I need the cut outs for the grill to match these.

 

[Mr. Sinister]

Mornin Rick does this car have interiorA pillar trim? If so is it smooth or textured? I need both smooth ones.

 

[mopardude318]

How are the fender extensions?

 

[rbkt65]

fender ext broken

 

[prodart440]

Are the doors in good shape?

 

[rbkt65]

front opening parts are a little bent. pic is a little goofy but when you have your s.o. take them. also looks like they have been hammered on a bit.

 

[rbkt65]

doors are not too bad but drivers side window won't roll down. also shipping would be a killer i think.

 

[Jim Ward]

front opening parts are a little bent. pic is a little goofy but when you have your s.o. take them. also looks like they have been hammered on a bit.

View attachment 1716050863

View attachment 1716050864

Yeah those don’t look too much better than what I have. Thanks for sending the pics

 

[rbkt65]

Sorry the pics are not that good. But they are probably worse looking in person.

 

[~73 Swinger]

I’m looking for a pair of front (amber) marker lights and trim from the sides of the front fenders…would you happen to have those available ?

 

[rbkt65]

Sorry. Trim and lamps already sold.

 

[dave yantzer]

do you have a grille shell?

 

[rbkt65]

No grille. Broken. Sorry

 

[demon34071]

How about the k-frame to rad support brace and hardware?

 

[rbkt65]

already gone. sorry.

 

[rbkt65]

1 decent door remains(pass side) rocker panels sold. rear glass good. front suspension and torsion bars still there.small odds and ends. will be all gone by next wednesday.

 

[walleyebum]

how are the wheel well chrome molding on all 4