Separate names with a comma.
Recovered the package deck tray
Looks like a 45° should work I might consider a 2 bolt flange to v-band adapter fitting
Accu Form Dash Cap arrived and I'll see how it fits this weekend Was around $90 shipped Inrerior now has a dome light bulb and a cover, and it works. Lol Going to charge the battery and get some fresh fuel and see what happens soon
Dash cover installed
Thanks for posting the photos of the Accuform dash cap, I was interested in one but couldn't find a photo of how they looked installed. Are you happy with the results? I think it looks good in the photo. Is that the unpainted color? Duster looks good
Yes its the plain black unpainted It's a nice product especially for under $100 shipped I'm going to take the clamps and weights off the dash cover tonight The adhesive requires a 7 hour setup time IIRC
I'm going to get 5 gallons of 92ish octane gas this coming week and see if I can get it to start and run
will be watching for the video!
I will definitely take a video It will be loud since I removed all the exhaust and am only running thee headers, for now
I need to find these https://engine-swaps.com/Photos4Website/Headers/Header_Accessories/BRB Flange Pipes Ad.jpg I think I have these Tri-Y headers
I used some Adams VRT on the rear seats. Amazed how well they cleaned up after two coats , it looks so good Going to do the front seats tonight VRT definitely is good stuff
Header flange attachment pipes arrive today I'm excited to install them and hope they are angled correctly for what I need Going remove the jackstands then off the front end and check the motor oil level Going to also check the fluid level in the diff Getting much much closer Adam's VRT also shined up the interior seats so well
Flange pipe extensions fit really good and are angled nicely
Well since I am going to drain the coolant, to hopefully repair one leaky header bolt, I may as well install a new tstat, right? Its been in the there for alteast 5 years Whats a good temp range 185? 195?
Cant stop a slow drip from the lower radiator hose Going to drain the coolant and replace it Hope I can find a part number on the hose
Motor started this weekend Need to fix a fuel leak on the fuel pump, one of the fittings maybe
New Carter fuel pump installed and no more leaks Edelbrock and chrome must be junk Anyways. Any tips or tricks to get the motor running and stay running? Would really bad timing cause a no start ?
it must be a chrome fuel pump thing, i've had a couple of chrome holley mechanical pumps over the years and they both leaked not used another since the second though. neil.