1973 Duster pop-out windows

[mad dog]

hello all, i am rebuilding my pop out windows and have aquired all the rubber seals to make this happen...except the hidden plastic hinge thats covered in mylar. The ones i have are brittle and are falling apart, can someone recommend a vendor for these and possibly a part number, any help would be appreciated and as always a big thank you ...Rich

 

[niceolddart]

I am working on the same thing right now. Detroit Muscle Technologies has the complete kit. They may have just the mylar type inserts for the glass as separate pieces if you already have the seals & other hardware needed. Check out "dadsbee" on this site for awesome reassembly how to.

 

[Dubob]

I believe these are what I used. They’re a bit longer than needed but trim to fit.

Mopar A Body 67-72 & B Body 68-70 Door Glass Division Channel Guide Set 2932230



Here’s a how to
Gallery: Pop-Out Quarter Window Restoration - Mopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar tech

 

[mad dog]

Thanks guys, I ordered a set from DMT...They are not cheap..lol
i ran the stainless through the buffer and cleaned the frames, I will assemble this weekend..all in all its not a bad job, i will rivet the frames together with 4 rivets instead of the long tube rivet, unless i can get those somewhere...Rich