1993 dodge 360 , my question is the crankshaft all ready drilled out to fit a standard transmission,

[Fly man]

Are the 360 moters 1993 already drilled at the end of the crankshaft to take a standard transmission. Back in 1969 I bought a 440 to put in my road runner and I had to drill the hole larger because the moter had an automatic

 

[Demonracer]

53020603 This part number crankshaft is drilled for a manual transmission, I can't say whether all of the crankshafts are drilled that way.

 

[67Dart273]

Not only was the 01 5.9 Magnum not to size it wasn't drilled AT ALL LOL

You don't HAVE to drill it "to diameter", you just make certain it's deep enough and then use the large bore pilot that fits in the converter bore