[WANTED] 273 or 318 complete engine

[ValiantDriver]

Looking for a complete rebuildable core engine for my project. Must have the alternator brackets & alternator, power steering brackets & pump. and all necessary pulleys. Am located between Ft Wayne and So Bend for local pickup only.

 

[SixFourDart]

I have a couple in Raymond,Illinois

 

[cosgig]

I have a few complete motors near Ann Arbor, Mi. if you're interested! PM me if you'd like to discuss!!

 

[ValiantDriver]

I have a couple in Raymond,Illinois

Let me know what you have as far as engine size and a price please. Also would need to know where Raymond is located to plan a trip if interested. Thanks, Randy

 

[ValiantDriver]

I have a few complete motors near Ann Arbor, Mi. if you're interested! PM me if you'd like to discuss!!

Have been to your area before, so need to know what you have and some sort of price please. Thanks, Randy

 

[cosgig]

I have a 65 273, and a 66 273, both complete and spin freely! They will undoubtably run but either should be rebuilt! Either motor $100!

I also have a 69 318 with 14k miles on it, but locked up from sitting! It's complete, and if you want it and want to helpe pull it you can have it for free!! It's crusty, but complete!

 

[krazykuda]

I gotta 318 here that ran when pulled... Just 22 miles inside IL from IN....

 

[mycuda]

Have a 69 datecode 318 shortblock complete no carb. crank pilot hole for manual trans.
Internals look pretty good as is. heads have alittle surface rust.
PM if interested. Have other parts/accessories to throw in.

Dave