[Found!] "302"small block heads

[Owen 340+6]

Looking for a stock useable complete set of the 302 casting heads going on a stock 318 with Hughes whiplash cam dad wants set for a truck of his Ellsworth Wisconsin reeeeally dont wanna pay shipping but will if have to

 

[66fs]

I have a pair bare castings, magnefluxed and milled. I can also supply valves and retainers. You will need a valve job, valve springs to match your cam.

 

[Owen 340+6]

I have a pair bare castings, magnefluxed and milled. I can also supply valves and retainers. You will need a valve job, valve springs to match your cam.

I have valve springs not worried about magnuflux 9 outta 10 came off running engines anyway that no one knew they were cracked. Thank you though. Just looking for cheap set wrong forum for that, i know. But figured the more eyes that see it less time i gotta spend looking

 

[66fs]

No, not cheap, I won't start work unless they are crack free. I won't tell you how many 302 heads I scrapped. I opted to stay with the early 273 heads instead. Good luck.

 

[GTX JOHN]

Lots of 302 are cracked fro exhaust seat to intake seat or plug hole.
Often do not leak YET.
Hard to tell unless cleaned and mag.

 

[Ottmundr]

Shipping's going to be a killer, have you consider some speedmasters?

Iron here,

CHRYSLER Speedmaster PCE281.1773 Speedmaster As-Cast Cylinder Heads | Summit Racing

Al-yoo-min-ee-um

CHRYSLER Speedmaster PCE281.1654 Speedmaster As-Cast Cylinder Heads | Summit Racing

 

[Garrett Ellison]

I've got a pair I can get to you. PM sent.

 

[Owen 340+6]

Done deal fellas, $75 bucks on craigslist pick up tomorrow after work thanks for the serious ones who messaged