5 years of "Chrysler TorqueFlite A-904 & A-727 Transmissions: How to Rebuild"

[VOETOM]

On this ~ five-year anniversary of the release of CarTech’s

Chrysler TorqueFlite A-904 & A-727 Transmissions: How to Rebuild, I want to thank all of you who bought it, read it, commented on it, and are using it. It took a while to write and photograph images for it but it has proven to be a good manual for those new to tearing transmissions apart or for those needing images that show a bit more detail than shop manuals do. The cool thing is that the profits help me fund various charitable activities.​

So, again, thank you all for the support over these first five years.
Tom Hand

 

[toolmanmike]

Congrats Tom. Your book will help thousands to do it right.

 

[WV64Signet]

Thanks Tom... it's part of the garage library and has been consulted frequently.

If you ever do a revision would love to see more of the early 904 pushbutton unique sections. Even the TSM is pretty thin

 

[crj1968]

Hey Tom,
Just got mine in the mail a few days ago. Now just need to find some time to get 'er done.
Thanks for the great resource!

 

[Murray]

A permanent part of my library, good job.

 

[67Dart273]

Yup Have one!!

 

[JDMopar]

I like my copy so well, it's in the gun safe when I'm not using it!

 

[RustyRatRod]

It's a great book, Tom. Thanks for making it happen!

 

[qkcuda]

I have my autographed copy! Can't believe it has been 5 years Tom.

 

[3forty]

Have one,very good.

 

[Furious65]

Now, where do I pick up a copy?

 

[WV64Signet]

Now, where do I pick up a copy?

Amazon



Ebay

Chrysler Torqueflite A904 & A727 Transmissions How to Rebuild Manual Book SA394 for sale online | eBay

Find many great new & used options and get the best deals for Chrysler Torqueflite A904 & A727 Transmissions How to Rebuild Manual Book SA394 at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Lots of other shops

 

[Mopar69gts]

Built my 904 using your book.
Very good and easy to understand.
Great pictures too...
Thank you Tom

 

[mgoblue9798]

On this ~ five-year anniversary of the release of CarTech’s​

​

View attachment 1716001306Chrysler TorqueFlite A-904 & A-727 Transmissions: How to Rebuild, I want to thank all of you who bought it, read it, commented on it, and are using it. It took a while to write and photograph images for it but it has proven to be a good manual for those new to tearing transmissions apart or for those needing images that show a bit more detail than shop manuals do. The cool thing is that the profits help me fund various charitable activities.​

So, again, thank you all for the support over these first five years.
Tom Hand

Tom do you happen to have a book that covers the A500/518 transmissions? If not do you know of one you would recommend?

 

[CFD244]

Cool! I bought one of these and never realized that you were a FABO member. The book is awesome. Thanks for taking the time to produce a great resource.

 

[jimjimjimmy]

I have my autographed copy! Can't believe it has been 5 years Tom.

i have been after an autographed copy for 5 years now .

 

[Killer6]

Had My copy ~2yrs. now, nice job Tom!

 

[JDMopar]

Tom do you happen to have a book that covers the A500/518 transmissions? If not do you know of one you would recommend?

@VOETOM I'd be interested to learn about 500/518's also. I do know the spring in the OD unit will bust your brains out if you try to remove or install it wrong!

 

[VOETOM]

Thanks to all who have supported this.

JD, I have no direct experience with 500/518s and therefore, I could never write intelligently about them. I am sure someone knows tons about them. The guys at SONNAX always seem to have great connections and I'll ll ask next time I chat with them.

 

[Siksty7 Dart 270]

Tom, your book gave me the courage to jump into a 904 overhaul. I picked up the trans for $100 last summer with intentions to put it behind a 318 Magnum, which I'm rebuilding too. The pair is destined for my 67 Dart. Thanks for all the hard work and willingness to pass along knowledge. I took some of your cues and sourced parts from A and A. They were helpful as well. On their recommendation, it's getting their red thin clutches. I'm very optimistic that this will be a solid transmission, just wish I had paid closer attention and got the end play measured before tearing it down ! Thanks again, you rock!!

 

[VOETOM]

Thanks so much!
I am currently helping redo another technical book and hoping it will have a good impact on lots of car folks (someday soon).
A & A and Cope and Sonnax and Alto and so many others are so nice to deal with. The hot rod transmission business is full of great people.

 

[VOETOM]

Jimmy, send it my way and I'll sign it!

 

[golden boy]

Just got this book @ Christmas . not done reading it yet . The brilliance of this book is the quality of the photos and the comments adjacent to each photo. This allows you to read a paragraph and immediately see the pic reference. I learn well that way. I have many trans books but much harder to digest the info. Thanks for the thought you put into the design of this book. The pictures are incredible

 

[Demonx2]

Sounds like a book I'll be adding to my library shortly!

 

[Rmoore]

I don’t have your book Sir , but I’ve been building transmission for over 20 years ! I was really lucky to be mechanically minded ! These types things have always came easy to me ! I have a really good friend who owns a transmission shop and was taught by him how to build automatic and standard transmissions ! All brands , if it drives down the road I’ve probably had my hands on the transmission ! With all that said , thank you for the time and the effort you you have put into your book ! Not everyone is lucky enough as I was to have the ability to do transmission work, or have a close friend that will teach them as I did ! Once again Sir , thank you for helping lots of people that can do the work , just need some guidance ! Awesome work !