[WANTED] 5x4 lug pattern wheels wanted

[ryan1964]

Hello I'm in Sacramento California and I'm looking for a set of 5x4 lug pattern 14 inch slot mags for my 64 barracuda like these that match

 

[33IMP]

15" small pattern slots are available, but not cheap, and you'd need to have yours polished to match.
Other than stock 13 or 14 inch steelies, nothing in 5 on 4" is common or cheap anymore.

 

[ryan1964]

I'm looking for all four 15" would be fine I'm just looking at all my options before I buy new ones trying to save some money 5 on 4 centerlines would be ok too

 

[33IMP]

Good luck (seriously!) finding the centerlines.
I have six small pattern lines, but none are for sale, and one pair certainly wouldn't help you, cause they won't fit much of anything.

 

[ryan1964]

I've found a set centerlines $1000 new tires look to be in good condition but they are for racing

 

[33IMP]

I've found a set centerlines $1000 new tires look to be in good condition but they are for racing

If the wheel widths work for you, that might not be a bad deal.
It looks like four new 15" slots will run around $900 without tires.
The amer8can outlaw2s (centerline lookalikes, but with cooling holes) look like around $575 for four.
That's assuming you can even get em.

 

[ryan1964]

That's not a bad deal

 

[jeff alder]

NOS 14x7 & 14x10 ALUMINUM SLOT WHEELS 5X4 BC 63-72 DODGE PLYMOUTH MOPAR | eBay The rears are wide. These have been listed for a long time maybe you could work something out. They look to be in good shape. I considered buying them months ago but found a set of centerlines on A bodies 3 hours from home. Good Luck with your quest.

 

[valiantpatrol]

A 14 x 10 wheel would never clear the low cut rear wheel wells of aa early "A" body.

 

[RustyRatRod]

A 14 x 10 wheel would never clear the low cut rear wheel wells of aa early "A" body.

I don't think they would either.

 

[33IMP]

There are NO tires currently available that will fit a 14x10 properly. A 245 is the biggest I know of, and that's pretty skinny for a 10 inch rim.

I had some 14x10 rims. They had M60x14s on em. M60x14 tires haven't been available for 30 or 40 years.

14x10 rims are wall-hangers.

 

[jeff alder]

A 14 x 10 wheel would never clear the low cut rear wheel wells of aa early "A" body.

Will Irby's "Redtail" 1965 Plymouth Barracuda on Forgeline One Piece Forged Monoblock CF1 Wheels - CarBuff Network That depends...never say never...it's been done. 1971 Mach one Mustang rear quarter mod on 65 Barracuda.

 

[71GSSDemon]

I just have a pair of Centerline 15x3.5 skinnys in small pattern I'd sell

 

[RustyRatRod]

There are NO tires currently available that will fit a 14x10 properly. A 245 is the biggest I know of, and that's pretty skinny for a 10 inch rim.

I had some 14x10 rims. They had M60x14s on em. M60x14 tires haven't been available for 30 or 40 years.

14x10 rims are wall-hangers.

They USED to make N-50-14s. LOL