64 cuda door glass installation

-

Garry

Well-Known Member
Joined
Sep 25, 2010
Messages
198
Reaction score
5
Location
Louisville,ohio
The channel for the glass and attached ss divider strip seems awful wide (the channel on the inside latch side of door with the felt on the inside) when the window is partially rolled down or all the way down it is fine but when it is rolled all the way up there seems to be way too much play in the glass. It wants to wobble back and forth about 3/4 inch ( back and forth in the direction of inside to outside of vehicle) When the door is slammed shut I am concerned about eventual damage. Any one have that problem ?
 
Well I kinda got most of it figured out ..its a combination between the rear glass channel adjustments and the adjuster screw for tipping the vent window assembly in or out.....and this is all done after one gets the door lined and shutting right....I think this is my last restoration project !!!!!
 
Sorry Gaz - I can't help you, but keep posting and asking, there'll be someone here who will know - don't be disheartened - life wasn't meant to be easy!! (for car restorers -lol)
 
-
Back
Top