[SOLD] 65 Dart GT

[RAT ROD AL]

Part out has begun.. I'll start listing the parts as I get them off lots of decent sheetmetal. Ask for what you need.
Lot of trim. Nice set of rally wheels. 7.25 open rearend. Drums on front..Paypal F&F or MO. Plus Shipping from FL.
As always, the cheapest parts in town !!

 

[JDMopar]

How are the mount tabs on the center piece of the Barracuda grill in the trunk? Them things are pot metal and would break if you slammed the hood too hard!

 

[JDMopar]

Oh! Since it was a 4 speed car, would you check that plate that holds the bottom of the steering column to the firewall to see if the clutch rod went thru it? I don't know if that was a 65 Early A thing, or just a 4 speed 65 Barracuda thing.

 

[RAT ROD AL]

Dart

Oh! Since it was a 4 speed car, would you check that plate that holds the bottom of the steering column to the firewall to see if the clutch rod went thru it? I don't know if that was a 65 Early A thing, or just a 4 speed 65 Barracuda thing.

Was a 4 spd, Barracuda is an auto.

 

[RAT ROD AL]

 

[JDMopar]

Dart

Was a 4 spd, Barracuda is an auto.

So the Dart steering column is MIA?

 

[JDMopar]

Might have spotted the column plate.

 

[RAT ROD AL]

You just need that plate?

 

[JDMopar]

You just need that plate?

Only if it's got the oval hole for the clutch rod to go thru. I'm honestly not sure if a 4 speed plate for a Dart is the same as a 4 speed plate for a Barracuda.

 

[YY1]

How much for the 273 Four Barrel emblems?

Are those small bolt rallyes?

 

[RAT ROD AL]

How much for the 273 Four Barrel emblems?

Are those small bolt rallyes?

Those both are spoken for. But I'll let you know.

 

[RAT ROD AL]

Only if it's got the oval hole for the clutch rod to go thru. I'm honestly not sure if a 4 speed plate for a Dart is the same as a 4 speed plate for a Barracuda.

 

[JDMopar]

View attachment 1716503636

Dang......Darts are different.

 

[Firstblood]

RRA,
For reference, this is from my 65 Dart Gt 4 speed.
The plate that goes under the part you posted has the oval hole for the clutch rod boot.

 

[JDMopar]

RRA,
For reference, this is from my 65 Dart Gt 4 speed.
The plate that goes under the part you posted has the oval hole for the clutch rod boot.View attachment 1716503649

Thank you! I did not know they were separate.

Al, if you find that plate in the car, please save it for me and let me know how much $$.

 

[RAT ROD AL]

xxxxxsoldxxxx

 

[RAT ROD AL]

$25 for the cluster. Unknown condition.
>>>>>SOLD<<<<<

$25 for some overload springs. Complete set.
>>>>>SOLD<<<<<

65 Barracuda Radio bezel. Nice shape. $30

Rear quarters . $15. Note 1 D is broken. All studs & nuts intact.

GT emblems All intact and in decent condition.
2 Sail panel GTs $30,
2 273 Four Barrel $60>>>>>SOLD<<<<<
and the 6 Vents with screws $60

 

[RAT ROD AL]

How much for the 273 Four Barrel emblems?

Are those small bolt rallyes?

$60 for the emblems.

 

[RAT ROD AL]

Got this GT down to the bare bones. Lots of good sheetmetal on it. Let me know what you may need. .

Nice clean open 7.25 rear nice newer springs

 

[RAT ROD AL]

Decent hood and fenders.

 

[RAT ROD AL]

Rear inner wheel wells are good on both sides.

 

[Dart fan]

V-8 center link ?

 

[RAT ROD AL]

Full set of GT trim most clips included.
Pretty nice shape, has a couple small dings here and there
$125

 

[RAT ROD AL]

V-8 center link ?

Sold already, sorry.

 

[JDMopar]

I'm guessing that other steering column plate is MIA?