68-72 K Member

[Heywodja]

Does anyone know of somone who can re-work the factory k member similar to the work that firm feel does, but in the Dallas FT Worth area?

 

[Matto]

Does anyone know of somone who can re-work the factory k member similar to the work that firm feel does, but in the Dallas FT Worth area?

You could buy just the k-frame reinforcement kit from FFI and possibly find a local welding shop to do the work.

 

[mvh]

I took mine to a race car fab shop. The guy had done several of them previously.

 

[Jim Lusk]

Any good welding shop can handle the job. You don't need the Firm Feel kit (I don't like the fit of most of the pieces). I just make my own. I also cut the k-member open below the LCA pin tubes to add welds to the inside.

 

[Heywodja]

Ok thanks guys, I am on a time budget, was hoping to kinda find a solution to not having the car down for days..

This will probably be the route I go

 

[Heywodja]

so who is a reputable race fab shop in the north dallas area? I want to meet this elusive creature, SHOW yourself KMember whisperer!