69 Dart parts

Mopar Parts Cars

Thread Status:
Not open for further replies.
  1. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    Contact Seller
    I will be picking a 69 dart up Saturday. Not sure how much will be left to part out, but I wanted to make it available to you guys before she goes to scrap metal.

    It was a /6 car but has a 318, nothing special, it has some good interior parts that I needed. I intend to tear it down to pretty much just the body and with the engine and trans in it. then will sell it (if possible).

    The body is really bad, not a lot if usable metal on it. I will post more details after I pic her up on Saturday.
     

    Attached Files:

  2. SpeedracerX

    SpeedracerX Still on this side of the dirt member

    Messages:
    3,520
    Likes Received:
    97
    Joined:
    Nov 19, 2008
    Location:
    Irwin, Pa
    Local Time:
    5:42 PM
    somebody put the wrong tail lights in that Dart lol... those are 68 tail light bezels and lenses... though I would be pretty interested in the 'dodge' emblems on the hood and trunk, and also the headlight bezels and possibly the grille... let me know after you get it
     
  3. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    The rear bumper and taillights are off his mothers 68 dart. The 69 tailights are in the trunk! All for sale.

    As for the headlight bezels and grille. all will be for sale except the passenger side bezel and hood trim. I need that... I will set the emblems aside for you.

    I will post more pics of what is for sale as I pull it off.
     
  4. ocdart

    ocdart Inland Mopars Car Club FABO Gold Member

    Messages:
    9,890
    Likes Received:
    2454
    Joined:
    Nov 5, 2006
    Location:
    North OC, SoCal
    Local Time:
    2:42 PM
    Hey Dart_Guy -
    Can you cut certain portions of the body? I need the passenger side trunk torsion rod bracket - the entire portion that goes from the dutchman panel to the rear wheel well. And maybe the trunk torsion rods as well.
    Please PM me to let me know if they're not rusty and available. I can send you my email if you can supply pics. Also, what you want for them and shipping to 92870.

    Thanks,
    Ken (ocdart)
     
  5. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    I will take a look this weekend and get lots of pics once I pick it up. If it is not rusty I will see what I can do for you.
     
  6. SpeedracerX

    SpeedracerX Still on this side of the dirt member

    Messages:
    3,520
    Likes Received:
    97
    Joined:
    Nov 19, 2008
    Location:
    Irwin, Pa
    Local Time:
    5:42 PM
    i appreciate you putting the emblems aside... do me a favor when you get the car, can you snap a pic of the tail light lenses and bezels please? I have a decent set of bezels (but it never hurts to upgrade lol) but my lenses are both cracked... thanks
     
  7. 340sport

    340sport Well-Known Member

    Messages:
    351
    Likes Received:
    5
    Joined:
    Mar 8, 2005
    Location:
    MD
    Local Time:
    10:42 PM
    I want (if available) hood trim, steering wheel, dash heater bezel(maybe the whole dash), ignition switch, hubcaps and door panels if decent.
     
  8. 68 bee

    68 bee Well-Known Member

    Messages:
    434
    Likes Received:
    46
    Joined:
    May 3, 2010
    Location:
    ny
    Local Time:
    5:42 PM
    PM sent
     
  9. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    Since the car will be stored 70+ miles from house (damn HOA) I will take lots of pics this weekend. i will also start a list of first come first serve on parts.

    Please keep in mind this may take me some time to tear down, but I hope to have it complete and off my buddies property with in a months time.
     
  10. beefovail

    beefovail Active Member

    Messages:
    34
    Likes Received:
    0
    Joined:
    Mar 31, 2011
    Location:
    AZ Territory
    Local Time:
    3:42 PM
    I'm in need of the chrome strip on the back edge of the drivers window.
    Thanks
    Keith
     
  11. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    stripped a lot of parts last weekend. Hopefully I will finish just after the 4th, but my inlaws are visiting, so I am not sure how it will go. I may drag my father inlaw out to help me...

    I will start going over what I pulled and responding to peoples request this week or next.

    Slow and steady, but I am getting there.
     
  12. rusty

    rusty Well-Known Member

    Messages:
    233
    Likes Received:
    4
    Joined:
    May 13, 2011
    Location:
    Desoto,Ks
    Local Time:
    4:42 PM
    Did you get my PM?
     
  13. cjdive

    cjdive Well-Known Member

    Messages:
    111
    Likes Received:
    1
    Joined:
    Jul 21, 2010
    Location:
    Milwaukee
    Local Time:
    4:42 PM
    Does it have a radio? If so, I am interested...do you have a pic of radio? Thanks
     
  14. sky nighthawk

    sky nighthawk Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Jun 12, 2011
    Location:
    new mexico
    Local Time:
    3:42 PM
    Do you have a good driver side hood hinge and front side marker ?

    Thanks Sky
     
  15. GermzD74

    GermzD74 Cool Member

    Messages:
    494
    Likes Received:
    0
    Joined:
    Dec 29, 2006
    Location:
    San Diego, CA
    Local Time:
    2:42 PM
    Need front bumper shipped to 92173, thanks.
     
  16. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    I finally got a good portion of the car tore down and will start getting pics and responding to everyone this week sometime.

    Sorry for the delay, the car is 80 miles from my house and and it is just too hot here.
     
  17. sky nighthawk

    sky nighthawk Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Jun 12, 2011
    Location:
    new mexico
    Local Time:
    3:42 PM
    Is there a good dash pad?

    Sky
     
  18. mjs69gts

    mjs69gts Well-Known Member

    Messages:
    852
    Likes Received:
    15
    Joined:
    Jan 7, 2011
    Location:
    madison wi
    Local Time:
    4:42 PM
    i could use the latch inside the glove box
     
  19. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    okay, for those of you have been patient with me, I have started a list and will start sending messages to everyone tomorrow.

    Kind of got crazy at work since one of my drafters up and quit on me...

    I still have stuff to remove but I should just about finish it next time I am there.
     
  20. Challenger

    Challenger Well-Known Member

    Messages:
    368
    Likes Received:
    7
    Joined:
    Feb 15, 2009
    Location:
    hallsville mo
    Local Time:
    4:42 PM
    i would be interesting in knowing about the kick panels thanks
     
  21. mopardude318

    mopardude318 Well-Known Member

    Messages:
    9,658
    Likes Received:
    812
    Joined:
    Jan 7, 2005
    Location:
    Gilroy, Ca
    Local Time:
    2:42 PM
    heater blower motor??? pics please???
     
  22. mjs69gts

    mjs69gts Well-Known Member

    Messages:
    852
    Likes Received:
    15
    Joined:
    Jan 7, 2011
    Location:
    madison wi
    Local Time:
    4:42 PM
    ill wait
     
  23. Dart_Guy

    Dart_Guy Well-Known Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 7, 2008
    Location:
    Katy, TX
    Local Time:
    3:42 PM
    once again, I promised some responses and did not... However, I am going to start PM'ing everyone tonight. finally... Although I may not have detailed pics for everyone just yet. I will get them this weekend though.

    this weekend, the car will be completed and i will be looking to get rid of the remains. this includes a 318 with tranny... Possibly for free since there is no interest on Craigslist for the engine after 3 weeks or more.
     
  24. DartNByYou

    DartNByYou Bit by the Dart

    Messages:
    52
    Likes Received:
    0
    Joined:
    Nov 16, 2010
    Location:
    orange county
    Local Time:
    2:42 PM
    in need of hinge bracket and metal around striker on driver side.
     

    Attached Files:

  25. henry b

    henry b Well-Known Member

    Messages:
    1,487
    Likes Received:
    45
    Joined:
    May 10, 2011
    Location:
    ANSONIA CONN 06401
    Local Time:
    4:42 PM
    i could use front windshild molding and the clips . how much shiped to 06401 ct thanks
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.