[SOLD] 72 340 Standard bore with fresh heads

-
Status
Not open for further replies.

Jim Ward

FABO Gold Member
FABO Gold Member
Joined
Apr 16, 2020
Messages
1,208
Reaction score
1,672
Location
Rockford MI
Rating - 100%
35   0   0
Contact seller
I have this early 72 cast crank 340 for sale. I disassembled the motor for inspection and it is very clean. .020 would likely clean it up. Included is a very low mile comp Xrtreme energy hydraulic flat tappet cam with lifters all marked to where they go. A nearly new weiand action plus intake unmolested. The heads are fresh with 1.88/160 valves. I ran this top end on my 360 last season and it went high 13’s at 101mph. $2500 located in west Michigan 49341. Prefer local pick up and cash. I can remove the heads for a photo of the bores for a serious buyer, I did grease them to prevent any corrosion.

040A9C0E-00A1-4302-8ABC-1D8C76CEDAB1.jpeg


98D6227C-DF5A-4A01-A0D2-8E1A5C97565E.jpeg


F1D0B34B-93CC-4B8D-BE5C-9BF65E9206BD.jpeg


ACDC5163-7252-4BBC-8BC8-2B6DDB3E09CB.jpeg


4EBA83B2-1EFE-4FFC-BCDE-D60CE2E892AE.jpeg


C603B2C6-BF4C-44A5-A4AD-3904473CDBD3.jpeg


9B59727D-B70B-4228-AF05-463EA437A83F.jpeg
 
2B443436. I’m going to go out on a limb here and say that’s not the VIN you were looking for?

D6D15E14-6A8D-4470-8A94-4E36F5FCB111.jpeg
 
Is there anything that can be deciphered from that partial VIN? What kind of car this motor came out of?
 

Status
Not open for further replies.
-
Back
Top Bottom