[Found!] 72 Dart Dash Circuit board

-
Status
Not open for further replies.

mopar_nocar

Well-Known Member
Joined
Jul 26, 2005
Messages
477
Reaction score
105
Location
Center Point, TX
Rating - 100%
7   0   0
Contact seller
I have been dicking with my dart's circuit board for 3 years now. Tired of it now and cannot pass inspection because the left turn signal indicator won't work....broken circuit.

I have seen earlier ones on ebag....anyone have a 72 circuit board that they know is good....OR a NOS one?

Let me know.

Thanks,

sb
 
I have same board on 73 Valiant cluster. No loose pins or other flaws. PM if interested.
 
We assume the board is the fault? A bit of info that may help.
Circuit board contact pins and copper traces support only the positive side of circuits. Fault can be the ground side. Screws that attach the board to the housing are part of the ground path. So screws/washers need to be snug to the copper pad on the board beneath them. Stripped screw threads can be the fault.
The lamp sockets have tiny plastic tangs holding them against the board. Distorted or broken tang will cause lamp inop.
 
Status
Not open for further replies.
-
Back
Top