73 dart sport small block motor mounts

[Rumblin_440]

I'm looking for a set of small block motor mounts for my 73 dart sport.

 

[cudamark]

I would have some for a 318. I'd have to check for the 340/360 version. They'll probably need new rubber inserts.
Thanks, Mark

 

[Rumblin_440]

I'm putting a 318 in it so they would work. How would I go about getting the rubber inserts?

 

[cudamark]

I bought them at NAPA the last time I needed them. They were less than $15ea......

 

[Rumblin_440]

Ok how much for the mounts shipped to 62049?

 

[Rumblin_440]

Ok here is what I'm workin with the car was originally a slant 6 supposedly some put a 440 in it but took it out before I got it. So im gonna need the mounts that allow a small block to be put into the slant 6 brackets. Right? Here are some pics of the K-frame because it may have been swapped to a V-8 K-frame didnt know if there was anyway to tell the difference.View attachment C27.jpg

View attachment C28.jpg

View attachment C29.jpg

 

[Dusteriffic]

That's a slant six k-member. You'll need the Schumacher /6 to SB mounts, or swap in a V8 k-member.

 

[Rumblin_440]

Ok thank you

 

[Rumblin_440]

CUDAMARK did you have a price in mind on the motor mounts?

 

[swifterthanyou]

340/360 mounts are the same, 273/318 are the same but not same as 340/360. 318 spool type are not the same as 360 spool type, drivers side is narrower by almost 1/2", passanger side is the same width but check the block studs against the mount holes. I have a set of 318 spool mounts and PM'd you on small block spool type K Frame.

 

[cudamark]

CUDAMARK did you have a price in mind on the motor mounts?

I don't have any that will convert your 6cyl K-member to use a small block. I just have the factory ones for a V8 K-member. $25 pair plus the ride.
Thanks, Mark

 

[Rumblin_440]

Ok well swifterthanyou has the k-frame and mounts so if that falls through I will get ahold of you

 

[gregpurcell]

I have the 73 V8 K member for $140 shipped