73 duster starting problems

-

chargers777

Well-Known Member
Joined
Apr 21, 2007
Messages
149
Reaction score
15
It has a yellow wire going to the starter relay. It has power in both crank and run position. My diagram says it should be a green and red wire. I have a brown wire that is only hot in crank position but it goes to one side of the ballast resistor. Any ideas? It's a reproduction harness for a 73 duster from classic industries but set up for points.
 
Dual or single ballast resistor?

Electronic ignition dual ballast - Copy.jpg


4 Pin ballast.jpeg


5 Pin Ballast.jpeg
 

-
Back
Top Bottom