76 Scamp Street Brawler

-

Osee

Member
Joined
Apr 2, 2017
Messages
10
Reaction score
6
Location
Ethelbert Manitoba
Just bought this 76 Scamp off a family friend.

Engine: 10.5:1 comp, 440 RB .030 over, stock crank .020 under, resized stock rods with arp hardware
flat top piston's, eddy performer rpm heads, Comp 21-228-1 installed at 105, m1 intake, 850 Demon, fender well headers.

Drive train: 4200 stall, 727, 4.10 gears, 29.5x10.5 r15 M/T's, S/S springs.

To do: Install Monster tach, thinking column mounted?
make new seat mounts
wire in Innovate wideband with data logger
install trans temp gauge
install hughes extra deep 46re pan
drive it like I stole it \m/

ripJDy9.jpg

LIc7s3o.jpg
 
Just bought this 76 Scamp off a family friend.

Engine: 10.5:1 comp, 440 RB .030 over, stock crank .020 under, resized stock rods with arp hardware
flat top piston's, eddy performer rpm heads, Comp 21-228-1 installed at 105, m1 intake, 850 Demon, fender well headers.

Drive train: 4200 stall, 727, 4.10 gears, 29.5x10.5 r15 M/T's, S/S springs.

To do: Install Monster tach, thinking column mounted?
make new seat mounts
wire in Innovate wideband with data logger
install trans temp gauge
install hughes extra deep 46re pan
drive it like I stole it \m/

ripJDy9.jpg

LIc7s3o.jpg
------------------------------nice mufflers !
 
I drained the fluid out of the trans pan and dropped the pan to put on my deep pan. The fliud was pretty burnt, and had swirls in it, I also found some metal flakes in the bottom of the pan. Trans rebuild in the pipeline?

f4fpdfq.jpg

uT8FZ5A.jpg

xqDIWUh.jpg
 
Made cutout's for the gauges in the radio slot in the dash, worked surprisingly well. Just need to make holes in the plastic to make it look cleaner. Mounted the tach and shift light on the colomn, Just need to run a wire to the trans temp sensor, and weld in a bung for the wideband.

gz1mSpJ.jpg

ERozHG6.jpg

7mMrbEC.jpg

gLCPNo0.jpg

YgeuAkX.jpg
 
-
Back
Top