833 what goes in this in the access plate

[unclebear]

I have a gasket and bolt set from Brewer’s , but I don’t know/remember what goes in the bolt hole in the center of the access plate . It is a 5/16 threaded hole.

Thanks for the help

 

[unclebear]

This is in a 81 Dodge d 150 pick up truck.

 

[Dan Brewer]

It had a pin that this arm pivoted from. Someone took it out, and threaded it for plug I assume.

 

[unclebear]

Thank You .

The transmission was rebuilt over 30 years ago then parked until last year.

Would you have that pin and bar for sale by any chance?

PS Your Hurst shift kit worked great . I have the gasket and new bolts ,So close to driving the truck again.

 

[Dan Brewer]

Thank You .

The transmission was rebuilt over 30 years ago then parked until last year.

Would you have that pin and bar for sale by any chance?

PS Your Hurst shift kit worked great . I have the gasket and new bolts ,So close to driving the truck again.

Yes, I have them but they are typically a press fit in the case. It would probably be better to replace the cover with the pin & lever still installed. Call the shop tomorrow, not stuff I have on the website.

 

[unclebear]

Excellent,I will call tomorrow.