AC/Heat Actuator Vacuum Lines

[sgrip65]

Hi Members. I posted this question in the Heat/Vent/A.C. slot of our forum, but did not get any response. Maybe I will get a bit more exposure here. I marked my vacuum lines when I disassembled my A.C. and heat boxes from my 65 Dart GT Restoration. Unfortunately, the markings/labels became lost since the time of removal. Now, during assembly, I became somewhat confused where these pneumatic/vacuum lines should be attached to the actuators. I did some research on line, and what I found was that the RED stripe vacuum line attaches, always, to the rod side of the actuator. Can anyone confirm this? Thanks for the help. sgrip65

 

[qkcuda]

This is on a 69, but maybe it will help?

 

[sgrip65]

This is on a 69, but maybe it will help?

View attachment 1715304198

View attachment 1715304199

View attachment 1715304200

Thanks cuda. Your Pics suggest what I had found regarding the yellow vs. the red stripe hose, and which side of the actuator they apply. I appreciate your help on this. I might be making a problem out of a simple approach. Thanks. sgrip65

 

[65ChargerDart]

This diagram (and others) from the '66 FSM helped me, hopefully it will you.

 

[sgrip65]

View attachment 1715305366 This diagram (and others) from the '66 FSM helped me, hopefully it will you.

Thanks for the help. Much appreciated. sgrip65