angles on driveshaft / u-Joints stock leafsprings with caltracs

-

Buschi340

Well-Known Member
Joined
Feb 19, 2005
Messages
1,248
Reaction score
46
Location
Wilhelmshaven, GERMANY
Hi,
never adjusted before. Can you guide me how and were to measure. And what angle is where the optimum? Can I expect movements at the pinion upwards with those caltracs? ( dragstrip a few times a year with Slicks - 12.xx second Manual car ) I read a lot in the net but it is kinda contrversy. especially with caltracs. tranny should show up from ground or driveshaft angle? and pinion down 3 degrees from driveshaft angle? Seems me stupid german Needs a step by step instruction.. :)
 
-
Back
Top