[WANTED] Axle seal for a 74 Duster with 7 1/4" diff.

[John Cailey]

Having trouble locating a axle seal for the above. Doesn't have to be a Mopar seal. I will settle for any brand.

 

[69FBCuda]

Did you pull the old ones? there are a couple different ones. Would be best to get the part number if possible. I have a list that i can send later. Mine takes Timken/national 484058

 

[John Cailey]

The part #, best I can read it is 3432691. No OD lip on the seal and the axle housing bore diameter for the seal is 2.223".

 

[Moparparts]

The part #, best I can read it is 3432691. No OD lip on the seal and the axle housing bore diameter for the seal is 2.223".

Not Mine but here is one
Mopar 3432691 Axle Shaft Oil Seal 1984 Dodge Diplomat Fifth Avenue With 318 | eBay

 

[toolmanmike]

NAPA has them. I would want a new one from a parts store and not a used one that has been setting for decades in someones garage. https://www.napaonline.com/en/p/NOS13418

 

[Moparparts]

Probably still available at your local Chrysler dealer as well since it interchanges with the later years and models

 

[barracudakid]

i just ordered 2 from my warehouse
i have a parts store
national 5124
should be here in a few days

 

[69FBCuda]

Crickets

 

[John Cailey]

NAPA has them. I would want a new one from a parts store and not a used one that has been setting for decades in someones garage. https://www.napaonline.com/en/p/NOS13418

Ordered the NAPA # NOS13418. Thanks mike! Should get it tomorrow. Not available from the dealer. 9" brake package takes a different seal from the 10" brake package. Thanks for everyone's input. As usual, FABO members are the best!!!