[SOLD] B/RB/Hemi solid roller lifters

[pishta]

Crane, Crower, possibly Engle? Don't know. Older Solid body, solid lifter, captive roller bearing, B-RB-Hemi straight link bars some took a spin but the rollers are still good, used condition. Wanna try that $50 roller cam you impulse bought at the swap meet without blowing your slush fund? You want some slant six rollers for that cam they will never make? You get 17 so run the best 16. Last 2 are later replacements with a slight change in design, notable a serviceable axle. All have .750 diameter rollers, not bushed. Bought from a Hemi for a B project that never got off the drawing board. Stored in an oiled bag. I buffed the lifters and they are smooth as a baby's butt. 8 link bars, need a wipe down but are still tight on the retainer. $141 shipped.

 

[yellow rose]

I'd bet everything I have that is an Engle lifter. Great lifters. Some had an .810 wheel and aluminum pushrods seat.

Really good lifters. If they were LA with the .810 wheel I'd snatch them right up.

 

[pishta]

Wont fit LA, too short with link button interference with block.