[FOR SALE] BB Solid Mystery Cam

Mopar Mechanical Parts For Sale

Thread Status:
Not open for further replies.
  1. Baxter61

    Baxter61 Well-Known Member

    Messages:
    1,155
    Likes Received:
    94
    Joined:
    Oct 4, 2006
    Location:
    Oregon City, OR
    Local Time:
    6:08 PM
    Contact Seller
    New solid lifter cam for bb mopar motors. “Mystery” cam as I do not remember the specs and do not have a block to put it in to measure. I believe it was in the 262-274 @.050 range, and lift was somewhere .650ish +/- .100. (Real good details, right?). I do remember it was bigger as I wanted something pretty nasty at the time. $150 shipped in the continental US from Oregon City, OR 97045. PayPal accepted.

    2DD9AD02-C0F7-483D-A8E7-42B9B436A5D4.jpeg

    4D3F47FF-9E7B-4F39-BC0C-1E07EFFCDDD1.jpeg

    884DAFAD-9E06-48DD-9D13-5CA915EBE9DF.jpeg
     
    • Like Like x 2
    • Rolling_Thunder

      Rolling_Thunder Rolling Thunder

      Messages:
      125
      Likes Received:
      35
      Joined:
      Jun 27, 2005
      Location:
      Los Angeles, CA
      Local Time:
      6:08 PM
      I believe the "S" numbers refer to ISKY's master lobe chart... not sure if this is true but given you know nothing else about it - it MAY help someone have an idea

      "S-480" = 288* advertised / 254* @ .050 .547" @ 1.5 ratio
      "S-396" = 292* advertised / 259* @ .050 .547" @ 1.5 ratio
      The "14" and "06" may be the Intake and Exhaust centerlines ?
       
      • Agree Agree x 1
      • nodemon

        nodemon Well-Known Member

        Messages:
        411
        Likes Received:
        118
        Joined:
        Mar 21, 2015
        Location:
        St.Louis
        Local Time:
        8:08 PM
        You can contact Isky and give the the numbers on the cam and they'll tell you exact specs.
         
      • 67charger383

        67charger383 Well-Known Member

        Messages:
        121
        Likes Received:
        40
        Joined:
        Feb 26, 2020
        Location:
        Maryland
        Local Time:
        9:08 PM
        Roller cam?
         
        • Disagree Disagree x 1
        • RustyRatRod

          RustyRatRod I was born on a Monday. Not last Monday. FABO Gold Member

          Messages:
          77,248
          Likes Received:
          54336
          Joined:
          Jun 7, 2010
          Location:
          Georgia
          Local Time:
          9:08 PM
          @Bighead440 might can help identify it.

          It's a large flat tappet solid, btw.
           
          • Agree Agree x 1
          • Bighead440

            Bighead440 Well-Known Member

            Messages:
            368
            Likes Received:
            288
            Joined:
            Jun 18, 2017
            Location:
            Milledgeville, Georgia
            Local Time:
            9:08 PM
            Rolling Thunder nailed it, I believe the LSA is 106, unsure about the "14" marking.
             
          Thread Status:
          Not open for further replies.
          1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
            By continuing to use this site, you are consenting to our use of cookies.