Bench seat shifter

[1969DartCustom]

Just picked up a 76 A833 OD that I’m going to be swapping into my 69 Dart.

Does anyone know to differentiate between a bench or bucket shifter?

Will a regular one clear the bench seat?

 

[1969DartCustom]

So far this is the only info I’ve found

Correct 4-speed shifter in a 1969 Dart?

Post # 16

 

[SMCARNUT]

The shifter handle you will need is stamped part number 7036 the one in your picture would work if you wanted to bend it but usually the chrome flakes off.
Here is a picture of the handle you need.

 

[1969DartCustom]

The shifter handle you will need is stamped part number 7036 the one in your picture would work if you wanted to bend it but usually the chrome flakes off.
Here is a picture of the handle you need.

View attachment 1716016580

Ah thank you I see!

 

[Dan Brewer]

The handle in your picture was originally used in the 76-80 Aspen / Volare. Will work fine in an A body, buckets or bench seat.

 

[1969DartCustom]

The handle in your picture was originally used in the 76-80 Aspen / Volare. Will work fine in an A body, buckets or bench seat.

Ahhh thank you! I’m soaking as much info as possible, I appreciate it!

 

[CRUZE 418]

I agree with post #5. That shifter will work with a bench seat. Had one in my '69 Dart when I bought it. Of course I got rid of it for the correct one.

 

[1969DartCustom]

I agree with post #5. That shifter will work with a bench seat. Had one in my '69 Dart when I bought it. Of course I got rid of it for the correct one.

I might look for the correct one in the future or try to make a pistol grip one haha but that will be future task, I just want to get the car going.

Checking everything I can think of before pulling and installing the engine and trans.