[SOLD] Big bolt pattern aftermarket axles - Mopar 8.75"

-
Status
Not open for further replies.

70Duster440

Well-Known Member
Joined
Jan 8, 2006
Messages
2,692
Reaction score
435
Location
Washington
Rating - 100%
1   0   0
Contact seller
Shipping from: Wenatchee, WA 98801
Price: $200 + Shipping (43 lb. Pkg - not cheap)
Payment: Vemo or PayPal + fees

Mopar 5 x 4.5" bolt pattern custom cut axles from Doctor Diff. 30 spline with Green bearings. Were in a slightly narrowed B-Body housing so they're longer than stock A-Body but shorter than B-Body. They measure 28.5". Stock A-body used 28.0875" so if you trim 1/2" off the splines you'll have the correct width. Lots of spline available for other narrowed widths. See his calculator for options: http://www.doctordiff.com/axle-calculator/

Less than 1700 miles. Changed housing so these are no longer needed.

Axles 01.jpg
Axles 02.jpg
Axles 03.jpg
 
Last edited:
28.0875" is less than 28.5" unless you added a zero in there thats not supposed to be there even then if you remove the zero, it would only be slightly more than 1/4" that would need to get whacked off the spline end. Just trying to help potential buyers. You may have made a typo.
 
Back side of green bearing to edge of splined end appears to be 24&5/8" these are stock width A body dr diff.

20190614_180059.jpg


20190614_180147.jpg
 
Thanks for all the measurements. Now back to our regularly scheduled program.
 
Status
Not open for further replies.
-
Back
Top