pyrojim
Well-Known Member
Are these drilled for a big bolt pattern and small bolt pattern?
Bolt pattern
- Thread starter pyrojim
- Start date
-
TrailBeast
AKA Mopars4us on Youtube
Sure does look like it to me.
mwls73duster360
Bad as Buddy Holly
Easy way is just measure but looks like it
Locomotion
Well-Known Member
You'll need to try them out with a wheel or something because they could be 4 1/2" and 4 3/4" for GM wheels! Hard to tell off hand.
Oklacarcollecto
Life is an experiment
Is this a picture of the parts you have for sale and the picture above is part of these?
If so the rotor has been redrilled to accept eith pattern while the hubs have been modified to the larger bolt pattern only.
If so the rotor has been redrilled to accept eith pattern while the hubs have been modified to the larger bolt pattern only.
Yup, but you can measure it.
Bulldozer
free ice cream sandwiches
a tape measure is your friend
pyrojim
Well-Known Member
Is this a picture of the parts you have for sale and the picture above is part of these?
If so the rotor has been redrilled to accept eith pattern while the hubs have been modified to the larger bolt pattern only.
the person who wants them has the hub for the small bolt pattern so I'm pitching the hubs. Didn't like the way they were drilled and welded.
-
